Pages: [1]   Go Down

Author Topic: Z3100 Paper Type Selection Questions  (Read 1700 times)

wsolum

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 58
Z3100 Paper Type Selection Questions
« on: April 17, 2009, 04:32:29 pm »

First, what difference does choosing HP paper versus generic on the front panel have on profiles?  I ran across a post here that said choosing the HP paper type over the generic version (i.e. HP Professional Satin Photo Paper rather than Photo Semi-Gloss/Satin) produces a wider gamut.  Any truth to that?

And secondly, with the generic types there are two additional choice offered: one for More Ink and one for Less Ink.  When should these be used?

Is there a document by HP that explains this stuff?

Thanks,
Wayne
Logged

Colorwave

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1006
    • Colorwave Imaging
Z3100 Paper Type Selection Questions
« Reply #1 on: April 17, 2009, 08:27:45 pm »

Take a look at the seventh link on this page, called Working with Other Commercially Available Papers.

http://z3100users.wikispaces.com/HP+Tech+Newsletters

It shows you the parameters that are lumped together when you pick a particular paper type, especially ink limiting, choice of blacks, and gloss enhancer options.  Unfortunately, this is the most recent document on the subject (2007), and HP says that they have no plans to update it, even though they have added presets and done some updates to the presets.  It tells you how to trick the printer, on occasion.  For instance telling it that paper backed silk fabric is actually Fine Art Paper >250gsm, to get quad blacks and the highest ink load.  They won't let us fully adjust these parameters independently, so this is the system we are forced to work with the dial these specifics in for each substrate.
Logged
-Ron H.
[url=http://colorwaveimaging.com

wsolum

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 58
Z3100 Paper Type Selection Questions
« Reply #2 on: April 19, 2009, 08:59:47 pm »

Quote from: Colorwave
Take a look at the seventh link on this page, called Working with Other Commercially Available Papers.

http://z3100users.wikispaces.com/HP+Tech+Newsletters

It shows you the parameters that are lumped together when you pick a particular paper type, especially ink limiting, choice of blacks, and gloss enhancer options.  Unfortunately, this is the most recent document on the subject (2007), and HP says that they have no plans to update it, even though they have added presets and done some updates to the presets.  It tells you how to trick the printer, on occasion.  For instance telling it that paper backed silk fabric is actually Fine Art Paper >250gsm, to get quad blacks and the highest ink load.  They won't let us fully adjust these parameters independently, so this is the system we are forced to work with the dial these specifics in for each substrate.

Thanks, that answers my question.  The pdf is now in my notebook (onenote)
Logged
Pages: [1]   Go Up