Pages: [1]   Go Down

Author Topic: Fuji S2 pro settings  (Read 7650 times)

fujimike

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Fuji S2 pro settings
« on: March 25, 2007, 04:55:10 pm »

Recently purchased an S2 pro. My main queries so far are:

This camera has over 6 effective magapixels and over 12 recorded pixels. I dont know the difference between this jargon and how i can produce images of the 12 recorded mega pixels to the same level of quality of a 12 effective mega pixel camera?

In the function menu i have 3 settings for colour, tone and sharpening. So far i have been using all these settings in high colour, hard tone and hard sharpening. Can anyone advise me please on the best settings to use for most shots especially lanscapes and macro work. And is there any rule of thumb for these settings.
Much appreciated fujimike
« Last Edit: March 25, 2007, 04:56:11 pm by fujimike »
Logged

situgrrl

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 342
    • http://www.charlyburnett.com
Fuji S2 pro settings
« Reply #1 on: March 25, 2007, 08:36:18 pm »

You'll need a proper geek to answer this properly but I'll do my best.  Please bear with my non-techy language

As I understand, Fuji use a proprietry chip technology with 2 types of pixels, S and R, where normal cameras only have one.  Whilst you have 12 million pixels, each site will use only one of the S or R options and therefore you produce a 6 million pixel image.  You can upres the image in photoshop but this is faking it - you cannot invent data that isn't there.  The important question is - why do you need to?  Don't get me wrong, I do upres my images for print - I never print below 240 ppi but there is no need to do it out of habit - you will not improve the quality of your work or add detail that isn't there.

With regards to the function menu, I don't have a clue!  My guess is that these are rather like the Picture Styles on Canon cameras.  Because I shoot raw, I ignore them totally, if I were shooting Jpg, life I'm sure would be different.  However, since you are shooting landscape and macro, I can see no reason to shoot anything other than raw.

I'm assuming that your "recent purchase" is also your first forray into (high end) digital photography.  If I'm right, sad to say you have a world to learn about post-processing.  The good news is that the main LL website has almost every answer to every question; since knowing what to ask is the hardest part, I'll try!

RAW vs JPEG, beyond the dumb acronyms.
RAW processing - how?  The Lightroom tutorials will see you through Adobe Camera RAW equally well, the only difference is the interface. (And lightroom does loads of other clever stuff)
Pixel editing software, do I need it, which and why? the answer is yes, if only because LR has lousy sharpening at present.  Photoshop Elements is the cheap answer, Photoshop CS3 is the expensive answer.
Sharpening, WTF, how can it be so complicated?  It's not, get Photokit Sharpener, thank the late Bruce Fraser, Jeff Shewe and anyone else at Pixel Genius and have a sound night's sleep.
Colour management, won't someone please simplify it?  (Okay, ProPhoto RGB, Pantone Huey (other calibration devices are available, despite their price, none will make coffee) and a half cop screen)
Printing, why is it such a minefield and can I claim refunds for all of this wasted ink and paper?

fujimike

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Fuji S2 pro settings
« Reply #2 on: March 25, 2007, 08:48:14 pm »

Quote
You'll need a proper geek to answer this properly but I'll do my best.  Please bear with my non-techy language

As I understand, Fuji use a proprietry chip technology with 2 types of pixels, S and R, where normal cameras only have one.  Whilst you have 12 million pixels, each site will use only one of the S or R options and therefore you produce a 6 million pixel image.  You can upres the image in photoshop but this is faking it - you cannot invent data that isn't there.  The important question is - why do you need to?  Don't get me wrong, I do upres my images for print - I never print below 240 ppi but there is no need to do it out of habit - you will not improve the quality of your work or add detail that isn't there.

With regards to the function menu, I don't have a clue!  My guess is that these are rather like the Picture Styles on Canon cameras.  Because I shoot raw, I ignore them totally, if I were shooting Jpg, life I'm sure would be different.  However, since you are shooting landscape and macro, I can see no reason to shoot anything other than raw.

I'm assuming that your "recent purchase" is also your first forray into (high end) digital photography.  If I'm right, sad to say you have a world to learn about post-processing.  The good news is that the main LL website has almost every answer to every question; since knowing what to ask is the hardest part, I'll try!

RAW vs JPEG, beyond the dumb acronyms.
RAW processing - how?  The Lightroom tutorials will see you through Adobe Camera RAW equally well, the only difference is the interface. (And lightroom does loads of other clever stuff)
Pixel editing software, do I need it, which and why? the answer is yes, if only because LR has lousy sharpening at present.  Photoshop Elements is the cheap answer, Photoshop CS3 is the expensive answer.
Sharpening, WTF, how can it be so complicated?  It's not, get Photokit Sharpener, thank the late Bruce Fraser, Jeff Shewe and anyone else at Pixel Genius and have a sound night's sleep.
Colour management, won't someone please simplify it?  (Okay, ProPhoto RGB, Pantone Huey (other calibration devices are available, despite their price, none will make coffee) and a half cop screen)
Printing, why is it such a minefield and can I claim refunds for all of this wasted ink and paper?
[a href=\"index.php?act=findpost&pid=108664\"][{POST_SNAPBACK}][/a]

Thanks for reply. I think ill stick to raw as have been lately. It records in 12 mega pixel setting when using raw but from what i understand from your reply it is only 6 mega pixels of data. I dont have picture menus on my camera just the options of colour settings etc. Thanks for trying on that one.
Logged

Jonathan Ratzlaff

  • Full Member
  • ***
  • Offline Offline
  • Posts: 203
Fuji S2 pro settings
« Reply #3 on: March 26, 2007, 05:04:25 pm »

I have used this camera for three years.  My thoughts and the way I use it.  I have colour settings and contrast set on org and the sharpening off.  Image size is maximum.  the pixels on the sensor are arrayed in a hexagonal fashion like a honeycomb and the processing software uses information from adjacent pixels to produce an image.  There is more resolution in the 12MP mode than in the 6MP mode, enough to count.  The camera even in jpeg mode has a lot of tolerance to overexposure and the dynamic range is quite substantial.

The reason why you use minimal settings on the camera is that it is easier to add contrast, colour and sharpening, but it is harder to remove it.

The raw converter records the pixel data for each pixel 6MP mode.  The raw converter converts the information to 12MP mode.  I shoot in raw format only when I am planning to do further processing.  Otherwise I shoot in jpeg mode in fine mode.  This is a 4Mb file.  the raw files are around 12MB.
Logged

fujimike

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Fuji S2 pro settings
« Reply #4 on: March 27, 2007, 05:57:46 am »

Quote
I have used this camera for three years.  My thoughts and the way I use it.  I have colour settings and contrast set on org and the sharpening off.  Image size is maximum.  the pixels on the sensor are arrayed in a hexagonal fashion like a honeycomb and the processing software uses information from adjacent pixels to produce an image.  There is more resolution in the 12MP mode than in the 6MP mode, enough to count.  The camera even in jpeg mode has a lot of tolerance to overexposure and the dynamic range is quite substantial.

The reason why you use minimal settings on the camera is that it is easier to add contrast, colour and sharpening, but it is harder to remove it.

The raw converter records the pixel data for each pixel 6MP mode.  The raw converter converts the information to 12MP mode.  I shoot in raw format only when I am planning to do further processing.  Otherwise I shoot in jpeg mode in fine mode.  This is a 4Mb file.  the raw files are around 12MB.
[a href=\"index.php?act=findpost&pid=108851\"][{POST_SNAPBACK}][/a]

Thats very helful. Thanks Jonathan Ratzlaff
Logged

MatthewG

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
    • http://www.matthewgivens.com
Fuji S2 pro settings
« Reply #5 on: April 06, 2007, 03:31:35 am »

Quote
Thats very helful. Thanks Jonathan Ratzlaff
[a href=\"index.php?act=findpost&pid=108940\"][{POST_SNAPBACK}][/a]


The S2 was my first pro level camera.  I loved it.  I have been traveling the Uk for a month now and after reading this I with I still had the S2.  Such I wonderful camera and for the money it cant be beat.  Its also the most durable camera I have ever owned.

The gentleman is correct about the setting to all that in post.

What size print are you looking for out of the S2?
Logged
Pages: [1]   Go Up