Pages: [1]   Go Down

Author Topic: Eizo CX271 - what kind of LEDs does it use?  (Read 491 times)

aaron125

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
Eizo CX271 - what kind of LEDs does it use?
« on: October 10, 2021, 07:44:45 am »

Iím using an Eizo CX271, which was generously given to me when recently a family member upgraded to a much newer screen. My question is regarding apps like BabelColor PatchTool, specifically the Display Check function. Iím measuring my screen with an X-Rite i1Display Pro colorimeter and in the PatchTool measurement device settings there are several options for the type of backlight which the screen uses.

Iím pretty sure itís either white LED or RG phosphor. Does anyone know with certainly the correct option to select? I think it might be White LED but obviously want to make absolutely certain Iím using the correct setting otherwise any measurements taken will be incorrect.

Thanks for any and all assistance.
Logged

Czornyj

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1933
    • zarzadzaniebarwa.pl
Re: Eizo CX271 - what kind of LEDs does it use?
« Reply #1 on: October 11, 2021, 04:52:40 am »

Iím using an Eizo CX271, which was generously given to me when recently a family member upgraded to a much newer screen. My question is regarding apps like BabelColor PatchTool, specifically the Display Check function. Iím measuring my screen with an X-Rite i1Display Pro colorimeter and in the PatchTool measurement device settings there are several options for the type of backlight which the screen uses.

Iím pretty sure itís either white LED or RG phosphor. Does anyone know with certainly the correct option to select? I think it might be White LED but obviously want to make absolutely certain Iím using the correct setting otherwise any measurements taken will be incorrect.

Thanks for any and all assistance.

It has GBr-LED AH-IPS (RG Phosphor)

aaron125

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
Re: Eizo CX271 - what kind of LEDs does it use?
« Reply #2 on: November 14, 2021, 04:49:34 pm »

Just wondering if youíre 100% certain that it uses GB-r LEDs? Only reason Iím asking is that Iíve since tried several of the options for the type of LED backlight in use, when using BabelColor PatchTool and setting the i1d3 setting to White LED has resulted in the greatest accuracy.

Iíll contact Eizo support to confirm but Iím curious as to where you managed to find the info regarding the type of LEDs this screen uses? Iíve read the User Guide from cover to cover and it doesnít seem to have any info relating to the type of LEDs in use. Even reading through some  (very) old Eizo CG/CX/CS pdf brochures and the too offer absolutely no insight into this matter.

Thanks again for your help and assistance.
Logged
Pages: [1]   Go Up