Pages: [1]   Go Down

Author Topic: Phase One XF shutter count  (Read 624 times)

wellcome86

  • Newbie
  • *
  • Offline Offline
  • Posts: 42
Phase One XF shutter count
« on: January 09, 2021, 04:42:37 am »

Hi there,

I have the opportunity to get a XF with a shutter count of 15.600.

Is that a lot? Or not even something to worry about?

Thanks
Logged

Ray Harrison

  • Full Member
  • ***
  • Offline Offline
  • Posts: 108
Re: Phase One XF shutter count
« Reply #1 on: January 09, 2021, 07:17:18 am »

Warranties on XF bodies can often range between 100k-250k actuations. I think 15k is reasonably low so if the body is in otherwise good shape, the count shouldn't stop you. Enjoy!
Logged

wellcome86

  • Newbie
  • *
  • Offline Offline
  • Posts: 42
Re: Phase One XF shutter count
« Reply #2 on: January 11, 2021, 05:50:48 pm »

Thank you
Logged

OlekVerze

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: Phase One XF shutter count
« Reply #3 on: January 14, 2021, 02:49:05 pm »

The shutter problem exists at the XF. The shutter on my copy broke for 18,000 shots. It cost me around 700 euros to replace it. After the renovation I was given an "improved" shutter. Half of my friends also changed the shutter, and the other half takes about 80 thousand pictures without problems.
Logged

SELPHICK

  • Newbie
  • *
  • Offline Offline
  • Posts: 25
Re: Phase One XF shutter count
« Reply #4 on: January 14, 2021, 11:35:25 pm »

The new Hap 2 bodies with the improved shutters are the best bet.
 my experience is $1500 CAD for a new shutter after 30000 clicks, and a 7-8 week repair turn around on  a Generation one body.
If the body is inexpensive, it may be a good deal, but you should expect a repair around 25000 as that is the new body warranty cut off on the first generation bodies.
Logged

wellcome86

  • Newbie
  • *
  • Offline Offline
  • Posts: 42
Re: Phase One XF shutter count
« Reply #5 on: January 29, 2021, 02:15:04 pm »

The new Hap 2 bodies with the improved shutters are the best bet.
 my experience is $1500 CAD for a new shutter after 30000 clicks, and a 7-8 week repair turn around on  a Generation one body.
If the body is inexpensive, it may be a good deal, but you should expect a repair around 25000 as that is the new body warranty cut off on the first generation bodies.

How do you identify the new body version ?
When did Phase One introduce the new version?
Logged
Pages: [1]   Go Up