Pages: 1 ... 3 4 [5] 6 7 ... 9   Go Down

Author Topic: Would you find this delta-E acceptable on a new PA271q?  (Read 10272 times)

geneo

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 60
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #80 on: April 20, 2019, 08:10:52 pm »

So you end up with what?

I see you are the kind of person who has to tell other people how they should think and act and who has to have the last word. Well what I have is my current NEC and I will  probably have an Eizo as a replacement in the near future and I won't have wasted any more days of my time

And FWIW,  NEC suggested the second replacement monitor would probably not resolve the issue, and it did not, so there is more here going on than you know. I also  expect you have an earlier one or was very lucky.
Logged
Walk softly and carry a big lens

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #81 on: April 20, 2019, 08:18:18 pm »

I see you are the kind of person who has to tell other people how they should think and act and who has to have the last word.
Wrong. Do whatever you want. Point is, facts are, there are PA271q's that run fine. You can either decide to get one, as owed to you or go elsewhere. I could care less. Get an Eizo, don't be shocked if you find the same issues.
Quote
NEC suggested the second replacement monitor would probably not resolve the issue, and it did not, so there is more here going on than you know.
Right, I'm the only PA271Q owner who's display as shown operates as it should.  :P
Logged
Andrew Rodney
Author “Color Management for Photographers"

Frans Waterlander

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 326
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #82 on: April 21, 2019, 12:45:06 pm »

I see you are the kind of person who has to tell other people how they should think and act and who has to have the last word. Well what I have is my current NEC and I will  probably have an Eizo as a replacement in the near future and I won't have wasted any more days of my time

And FWIW,  NEC suggested the second replacement monitor would probably not resolve the issue, and it did not, so there is more here going on than you know. I also  expect you have an earlier one or was very lucky.

You hit the nail on the head!
Logged

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #83 on: April 21, 2019, 12:53:06 pm »

You hit the nail on the head!
If only you used yours.... :P
As you once did earlier:

A topic you are watching has been removed by Frans Waterlander.

Regards,
The Luminous Landscape Forum Team.
Logged
Andrew Rodney
Author “Color Management for Photographers"

Frans Waterlander

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 326
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #84 on: April 21, 2019, 02:06:54 pm »

who has to have the last word.
Logged

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #85 on: April 21, 2019, 02:10:38 pm »

who has to have the last word.
Who had to remove all his silly posts due to embarrassment?
EDIT: I'm not one to strip away mistakes like you, I just fix em.
« Last Edit: April 21, 2019, 02:46:02 pm by digitaldog »
Logged
Andrew Rodney
Author “Color Management for Photographers"

Frans Waterlander

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 326
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #86 on: April 21, 2019, 02:42:59 pm »

No embracement here. I removed those threads because I got sick and tired of the hostile replies by certain people, and you know  who you are.
Logged

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #87 on: April 21, 2019, 02:48:07 pm »

No embracement here. I removed those threads because I got sick and tired of the hostile replies by certain people, and you know  who you are.
Good move on your part as so few where taking you seriously, including me of course. Hostile is your code for being corrected or being pushed back for never accepting an answer you didn't predetermine you wanted to hear that were wrong. But then there's this history here and over on PhotoNet where posts you didn't create and can't delete still exist to illustrate this posting agenda.
Logged
Andrew Rodney
Author “Color Management for Photographers"

Frans Waterlander

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 326
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #88 on: April 21, 2019, 02:49:16 pm »

Blah, blah, blah...
Logged

vikcious

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 63
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #89 on: April 21, 2019, 02:51:06 pm »

I suppose this exchange couldn't have been a private one for the sake of keeping this thread focused on the real issue and clean of testosterone, could it?
Logged
|| One screw-up is a mistake, two screw-ups is a trend, three screw-ups is a style ||

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #90 on: April 21, 2019, 02:56:14 pm »

I suppose this exchange couldn't have been a private one for the sake of keeping this thread focused on the real issue and clean of testosterone, could it?
Indeed, Franz is again just hijacking a thread about a product he's got zero experience with. Let's do keep on topic and not feed trolls.
NEC is aware of the issues. I've spoken with the US product manager and they are working on why some panels exhibit this behavior but again, not all do. So anyone who sees the same issues should contact NEC and get the unit replaced. Now if someone does this more than once and doesn't wish to continue until they receive satisfaction, they have to do what they feel is necessary above and beyond accepting units until they work as they should.
Logged
Andrew Rodney
Author “Color Management for Photographers"

geneo

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 60
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #91 on: April 21, 2019, 03:22:11 pm »

Indeed, Franz is again just hijacking a thread about a product he's got zero experience with. Let's do keep on topic and not feed trolls.
NEC is aware of the issues. I've spoken with the US product manager and they are working on why some panels exhibit this behavior but again, not all do. So anyone who sees the same issues should contact NEC and get the unit replaced. Now if someone does this more than once and doesn't wish to continue until they receive satisfaction, they have to do what they feel is necessary above and beyond accepting units until they work as they should.

Man what a boor. You have already confirmed my initial impression, so I am sure you will have to reply to this, but you are on my blocked user list now, so I will not see it.
Logged
Walk softly and carry a big lens

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #92 on: April 21, 2019, 03:26:36 pm »

Man what a boor. You have already confirmed my initial impression, so I am sure you will have to reply to this, but you are on my blocked user list now, so I will not see it.
But I answered your question awhile ago:

Would you find this delta-E acceptable on a new PA271q? I have tried everything under the sun and the results are still the same. delta-E of white point is fine.
You didn't find that boring but sure, block: ignorance is said to be bliss: Enjoy.
Logged
Andrew Rodney
Author “Color Management for Photographers"

perbjesse

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #93 on: April 22, 2019, 04:34:05 pm »

So here is a question: Is this problem that a screen must manifest straight out of the box, or is it the case that the screen may be fine initially but develop this problem over time?
Logged

geneo

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 60
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #94 on: April 22, 2019, 05:36:08 pm »

So here is a question: Is this problem that a screen must manifest straight out of the box, or is it the case that the screen may be fine initially but develop this problem over time?

From my experience and what I could glean from support, Straight out of the box or you are good.
Logged
Walk softly and carry a big lens

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #95 on: April 22, 2019, 05:51:03 pm »

So here is a question: Is this problem that a screen must manifest straight out of the box, or is it the case that the screen may be fine initially but develop this problem over time?
Straight away, it's an issue with the panel.
Logged
Andrew Rodney
Author “Color Management for Photographers"

Christopher

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1475
    • http://www.hauser-photoart.com
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #96 on: April 23, 2019, 08:40:35 am »

Rodney in your honest opinion, what do you think of mine? Would you accept it as "good enough" or not?
Logged
Christopher Hauser
[email=chris@hauser-p

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #97 on: April 23, 2019, 08:54:57 am »

Rodney in your honest opinion, what do you think of mine? Would you accept it as "good enough" or not?
To be honest, I don't think that report is all that critical.
Logged
Andrew Rodney
Author “Color Management for Photographers"

Christopher

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1475
    • http://www.hauser-photoart.com
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #98 on: July 01, 2019, 03:41:09 pm »

wow, so nothing really happened. Next time I'm going with Eizo again.
Logged
Christopher Hauser
[email=chris@hauser-p

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 15787
    • http://www.digitaldog.net/
Re: Would you find this delta-E acceptable on a new PA271q?
« Reply #99 on: July 01, 2019, 03:51:18 pm »

wow, so nothing really happened. Next time I'm going with Eizo again.
Don't be so certain Eizo isn't affected. Might not see anything like the reports shown that illustrate the issue in their software but that doesn't mean it's not happening.
Logged
Andrew Rodney
Author “Color Management for Photographers"
Pages: 1 ... 3 4 [5] 6 7 ... 9   Go Up