Pages: [1]   Go Down

Author Topic: LED replacements for modelling lamps  (Read 3512 times)

BobShaw

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2218
    • Aspiration Images
LED replacements for modelling lamps
« on: December 22, 2017, 11:40:41 pm »

Hi,

Has anyone used any LED lamps to replace halogen modelling lamps?
If so what worked and didn't, please?

Specifically,
Has anyone seen or used an LED replacement light for the Osram 64516 used as modelling lights in Elinchrom studio pack heads?
(These are 240V globes and similar 110V globes are used in the US)

I want to have an ideally 5000K replacement that dims.

The other option is to replace the Halogen 12V globe 23044 in the Ranger RX heads

Bob
« Last Edit: February 22, 2019, 05:24:11 pm by BobShaw »
Logged
Website - http://AspirationImages.com
Studio and Commercial Photography

nemophoto

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1021
    • Nemo Niemann Photography
Re: LED replacements for modelling lamps
« Reply #1 on: May 17, 2018, 10:02:22 pm »

I have tried searching as well, but no one seems to make LEDs in a halogen-sized form factor that is compatible with strobes. All the bulbs I've seen so far are either the typical screw base or track lighting replacement.
Logged

BobShaw

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2218
    • Aspiration Images
Re: LED replacements for modelling lamps
« Reply #2 on: February 22, 2019, 05:23:45 pm »

Just bouncing this to the top again as things change so rapidly with LED options.
Logged
Website - http://AspirationImages.com
Studio and Commercial Photography

DP

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 727
Re: LED replacements for modelling lamps
« Reply #3 on: February 22, 2019, 09:19:38 pm »

Just bouncing this to the top again as things change so rapidly with LED options.

there are certainly Gx6.35 base, 110V, LED bulbs and a lot of them...

PS: there also adapters like G4 to G*6.35 and then there are G4 base 110V LED bulbs
« Last Edit: February 22, 2019, 09:30:57 pm by DP »
Logged

BobShaw

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2218
    • Aspiration Images
Re: LED replacements for modelling lamps
« Reply #4 on: May 28, 2019, 07:04:28 pm »

there are certainly Gx6.35 base, 110V, LED bulbs and a lot of them...
PS: there also adapters like G4 to G*6.35 and then there are G4 base 110V LED bulbs
Thanks. I will check them out but I need 240V.
Logged
Website - http://AspirationImages.com
Studio and Commercial Photography
Pages: [1]   Go Up