Pages: [1]   Go Down

Author Topic: Need a Monitor Profiler  (Read 3682 times)

Mike Sellers

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 666
    • Mike Sellers Photography
Need a Monitor Profiler
« on: April 13, 2014, 03:07:15 pm »

Which would be a better buy and why-Colormunki Smile or Spyder4.0 Express?
Logged

Czornyj

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1948
    • zarzadzaniebarwa.pl
Re: Need a Monitor Profiler
« Reply #1 on: April 13, 2014, 03:10:46 pm »

Spare that money for drinks
Logged
Marcin Kałuża | [URL=http://zarzadzaniebarwa

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 20630
  • Andrew Rodney
    • http://www.digitaldog.net/
Re: Need a Monitor Profiler
« Reply #2 on: April 13, 2014, 03:22:48 pm »

Which would be a better buy and why-Colormunki Smile or Spyder4.0 Express?

Neither. Not if your goal is a good screen to print match in all cases thanks to lame software control they provide.
Logged
http://www.digitaldog.net/
Author "Color Management for Photographers".

Mike Sellers

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 666
    • Mike Sellers Photography
Re: Need a Monitor Profiler
« Reply #3 on: April 13, 2014, 03:42:02 pm »

Bare minimum for a quality profile??
Logged

Czornyj

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1948
    • zarzadzaniebarwa.pl
Re: Need a Monitor Profiler
« Reply #4 on: April 13, 2014, 03:51:40 pm »

X-Rite i1Display Pro, or ColorMunki Display and dispcalGUI+ArgyllCMS
Logged
Marcin Kałuża | [URL=http://zarzadzaniebarwa

Simon Garrett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 742
Re: Need a Monitor Profiler
« Reply #5 on: April 13, 2014, 04:10:22 pm »

Which would be a better buy and why-Colormunki Smile or Spyder4.0 Express?

The Colormunki Display or Spyder 4 Pro are both quite a bit more flexible, and cost only a little more than the Colormunki Smile. 

Neither can profile printers.  Do you print with your own printer?  If not (e.g. if you get prints done by a print lab), no problem, these will do fine for a monitor.  If you print with your own printer, and you use the printer maker's ink and paper, then the printer maker's profiles (usually installed automatically when you install the printer driver) may be good enough.  In my experience with several Epson printers that's been the case. 

If you're really serious about closest match of colours on your own printer, you need to go up a grade to something that profiles printers - e.g. Spyder Print or Colormunki Photo (at double the price).  But profiling the monitor is (IMHO) more important. 

By the way, for either of these, the software provided is not as good or flexible as Argyll (open source) software.  Argyll software is a bit of a pain to install, as you need to install the basic software from http://www.argyllcms.com/ but this is command-line only.  There is a very good Windows, Mac or Linux front end called dispcalGUI, which you get separately from http://dispcalgui.hoech.net/.  However, I would strongly recommend the Argyll / dispcalGUI combination over the provided software for pretty much any monitor calibrator/profiler. 

PS - just seen Czornyj has said much the same thing, only much more succinctly!
Logged

Czornyj

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1948
    • zarzadzaniebarwa.pl
Re: Need a Monitor Profiler
« Reply #6 on: April 13, 2014, 04:56:11 pm »

PS - just seen Czornyj has said much the same thing, only much more succinctly!
Not exactly ;)

I've just tested Spyder 4 on GBr LED NEC EA244UHD using JETI Specbos 1211 measurement as a reference - to put it mildly, I wasn't impressed at all.

I highly recommend X-Rite i1D3 (i1Display Pro, ColorMunki Display) - that's surprisingly good, very smart engineered colorimeter.
« Last Edit: April 13, 2014, 05:05:30 pm by Czornyj »
Logged
Marcin Kałuża | [URL=http://zarzadzaniebarwa

Simon Garrett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 742
Re: Need a Monitor Profiler
« Reply #7 on: April 13, 2014, 06:00:21 pm »

Thanks for that Czornyj.

I'd read a review that said something similar, and was sure I'd bookmarked it, but can't find it so your info is much appreciated. 

On the basis of that earlier review I'd read, I have a Colormunki Display, and use it with Argyll/dispcalGUI software.
Logged

Mike Sellers

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 666
    • Mike Sellers Photography
Re: Need a Monitor Profiler
« Reply #8 on: April 14, 2014, 02:15:47 am »

OK thanks
Logged
Pages: [1]   Go Up