What i will need to connect Imacon 132c with Fuji GX 680 I

[File Photography Studio]

Hi from Greece
This is my first post in the forum and to take this opportunity I would like to thank you all for the information shared in the world.
I work exclusively in still life - product - Jewellery and until now I had FF DSLR.
I try to access the world of MFDB and i would like your help.
Recently i bought second hand a Fuji GX 680 mark I and a DB Imacon 132c. I have received the camera,  but I still have not the DB and i would like until receive it, to know what adjustments would need for combination to work. The camera comes with Hasselblad V and H adapters.
Thank you.

Marios Karampalis
www.filephotography.com

[EricWHiss]

You'd need the ixpress fuji adapter plate and the cables for the series I camera, for sure. I dunno what else.  I would try Hasselblad parts to see if they still have one of the adapter plates in stock. 

[File Photography Studio]

Thanks for the reply.
I can't find adaptor for my 136c I only found this:

http://www.ebay.com/itm/Imacon-Ixpress-Adapter-Fuji-GX680-F-FlexFrame-Carnival-3020-4040-Ixpress-96-384/140992194647?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D1166770630484410949%26pid%3D100033%26prg%3D1011%26rk%3D2%26rkt%3D4%26sd%3D400547495612%26

But it is for ixpress 96 not for 136c

[EricWHiss]

That actually might work - there isn't much difference between any of the models in terms of screw positions for the adapters or data pin placement. The only thing I wonder about is the cable. There were different cables for each of the different GX 680 camera models, I, II and III.  The plates themselves are all the same for all the backs.

[File Photography Studio]

Thank for the reply,
The way i see the cord I think it's just the same port as the Remote control of GX680, on the one end and on the other and of the cord the big plag is the same with the DB plag. But if connected in this way does not stay tany plag port for the DB to connect to the HDD! ! I can not understand I'm confused with the adapters altogether!
I have sent a message to the company that sells the above adapter, hopefully will answer if it is working with imacon 132c.

[File Photography Studio]

They response from ebay that specific adapter it is no going to work with my GX680 I , obviously the cable will be for model II nad III  

[Brian Hirschfeld]

bet we're kicking ourselves for booting a certain somebody............ha. Not.

[File Photography Studio]

Hi, i am looking for an Adaptor Hasselblad H for Juji GX 680 mark I new or used.
If anyone has any information about that, i appreciated.
Thanks

[EricWHiss]

I have the iadapter for my ixpress 528 if I ever want to use on Fuji.  It's buried deep in a closet.  The only thing different is the cables.  Give me a few days and I will take pictures of the cables and post them here.  There is a different one for each model of the camera as I recall. 

[File Photography Studio]

Thank you Eric, i know the problem with the cables ... the GX680 I have one cable and the GX680 II and III have an other type of cable!!!
The adapter for 528 is the same with 132c exept the cable??

[File Photography Studio]

In this link:

http://www.ebay.com/itm/Imacon-Ixpress-Adapter-Fuji-GX680-F-FlexFrame-Carnival-3020-4040-Ixpress-96-384/140992194647?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D1166770630484410949%26pid%3D100033%26prg%3D1011%26rk%3D2%26rkt%3

The cables is for GX II & III

[EricWHiss]

Hi,
Yes the adapter plate itself is the same for all the bodies - the one on ebay is the same as mine.  I wish I could tell you more about the cables.  Here's a picture of what I have as far as cables in my kit that supposedly works with all three versions of the Fuji.  I'll bet you could find most of the others that are not included in the ebay auction if you end up needing them.  
Also refer to this link on the hasselblad digital forum for more info on cables ... http://www.hasselbladdigitalforum.com/index.php?topic=1168.0

[File Photography Studio]

Thanks again for your answer.
I've read in a long time that forum. From what I have seen the cable with the yellow line is for models II and III, and what you got, that is all black, to be the oldest for model I.
But to be sure you should be tested with DB.
Because the DB that i bought "wearing" adapter mount Hasselblad "H" I'm trying to find the adapter from "H" to GX680 I.
If I find Adapter, then with a pc sync cable theoretically would be able to work but i will not have real tethered!
If you have a way to test the cable with a Imacon DB and a GX680 I, gladly I can buy the adapter and the cable. 


Thank you.

[File Photography Studio]

Good morning,
Because the back has on the "H" mount and i prefer not to get off.
Will it work normally, if the cable (for Fuji GX 680 I) connecting the camera with an adapter for "H" mount?
Will i have tehered shoot from the mac??

Thanks