Pages: [1] 2   Go Down

Author Topic: Sharpening Technique in Camera Raw and Photoshop  (Read 31263 times)

ACH DIGITAL

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 613
    • http://www.achdigital.com
Sharpening Technique in Camera Raw and Photoshop
« on: March 03, 2012, 09:16:30 pm »

What would you consider to be a good sharpening technique and at what stage would you apply it? Being in Photoshop or in Camera Raw. Considering too detail, luminosity and noise sliders.
So far I have try many combinations and the results vary, so I've never been very convince.
Right now I'm using

Thanks ACH
Logged
Antonio Chagin
www.achdigital.com

Kirk Gittings

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1561
    • http://www.KirkGittings.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #1 on: March 03, 2012, 09:43:30 pm »

What camera and ISO? These things matter.
Logged
Thanks,
Kirk Gittings

ACH DIGITAL

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 613
    • http://www.achdigital.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #2 on: March 03, 2012, 10:26:06 pm »

My camera is the Canon 5D MKII. Always iso 100..
Hopefully a 36 mix. Nikon D800E.
ACH
Logged
Antonio Chagin
www.achdigital.com

Schewe

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 6229
    • http:www.schewephoto.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #3 on: March 04, 2012, 01:08:19 am »

What would you consider to be a good sharpening technique and at what stage would you apply it? Being in Photoshop or in Camera Raw.

Uh...well, there's no way we could comment on your sharpening settings without seeing the image. Each image may need individual setting in order to be optimal. You do want to get the best sharpening and noise reduction (even at ISO 100 you may need noise reduction) in Camera Raw–otherwise you'll be leaving image quality on the table if you wait till Photoshop to do your capture sharpening. You do understand the concept of a sharpening workflow, right?

And a 0.5 radius would on;y work for really high frequency images...there's a reason why the default is 1.0. Yes, with some images, lowering the radius might be called for...but it varies image by image.
Logged

Bryan Conner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 539
    • My Flickr page
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #4 on: March 04, 2012, 02:22:40 am »

I highly recommend purchasing and reading "Real World Image Sharpening with Adobe Photoshop" by Bruce Fraser and Jeff Schewe.  It is better to learn the how and why of sharpening first, only then, can you know the best way to sharpen an image.
Logged

Schewe

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 6229
    • http:www.schewephoto.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #5 on: March 04, 2012, 02:29:04 am »

Well, I was gonna suggest that but thought it might be a bit self-serving...

:~)

If nothing else, it would be useful to read Bruce's words on the subject: Out of Gamut: Thoughts on a Sharpening Workflow.
Logged

deejjjaaaa

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1170
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #6 on: March 04, 2012, 04:08:12 am »

You do want to get the best sharpening and noise reduction (even at ISO 100 you may need noise reduction) in Camera Raw–otherwise you'll be leaving image quality on the table if you wait till Photoshop to do your capture sharpening.

Schewe, have a question for you:

1) raw -> ACR (no sharpening, no NR) -> 16bit .TIFF -> ACR (just sharpening & NR) -> 16bit .TIFF

2) raw -> ACR (sharpening and NR) -> 16bit .TIFF

so do we have a really better sharpening and NR in case #2 vs case #1 and if so - why ?
Logged

ErikKaffehr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 11311
    • Echophoto
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #7 on: March 04, 2012, 05:00:14 am »

Hi,

Me not Schewe, but anyway...

You would really do capture sharpening and denoise in connection with demosaic. Add to that that ACR has built in contour masks and probably much better noise reduction than the one built in into PhotoShop.

Best regards
Erik

Schewe, have a question for you:

1) raw -> ACR (no sharpening, no NR) -> 16bit .TIFF -> ACR (just sharpening & NR) -> 16bit .TIFF

2) raw -> ACR (sharpening and NR) -> 16bit .TIFF

so do we have a really better sharpening and NR in case #2 vs case #1 and if so - why ?
Logged
Erik Kaffehr
 

ErikKaffehr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 11311
    • Echophoto
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #8 on: March 04, 2012, 05:03:41 am »

Hi,

For landscape I would use low radius but try to increase "detail" to 100%. That would switch sharpening to use deconvolution. I'd keep down amount to avoid crispness and add some noise reduction. Not saying it's optimal technique, but you could try.

Best regards
Erik


What would you consider to be a good sharpening technique and at what stage would you apply it? Being in Photoshop or in Camera Raw. Considering too detail, luminosity and noise sliders.
So far I have try many combinations and the results vary, so I've never been very convince.
Right now I'm using

Thanks ACH
Logged
Erik Kaffehr
 

Bryan Conner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 539
    • My Flickr page
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #9 on: March 04, 2012, 05:41:44 am »

Well, I was gonna suggest that but thought it might be a bit self-serving...

:~)

If nothing else, it would be useful to read Bruce's words on the subject: Out of Gamut: Thoughts on a Sharpening Workflow.

Jeff, this book is image quality changing (life changing to a photographer) IMHO.  So, I do not hesitate to recommend this book, or any of the Real World Camera Raw books.  I wish that I could have had your privilege of knowing Bruce, but being able to read, and learn, from him through you (along with your ideas of course) is the next best thing.  So, thank you.

 
Logged

ACH DIGITAL

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 613
    • http://www.achdigital.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #10 on: March 04, 2012, 10:05:59 am »

First of all, thank you all for your comments.
I might add that I need to work fast in many cases. Just when I'm doing personal work, can I have time to go particularly on each image. SO I need to work it out as part of a workflow.
After reading the suggested page and comments I came up to this combination, still pending on your comments you might add.
I try this with a 22 mpx image and a 39 mpx. Looks better..



ACH
Logged
Antonio Chagin
www.achdigital.com

ACH DIGITAL

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 613
    • http://www.achdigital.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #11 on: March 04, 2012, 10:12:19 am »

BTW I'm getting the book "Real World Image Sharpening with Adobe Photoshop" by Bruce Fraser and Jeff Schewe.

We have some very respectable audience in Luminous Landscape. This is marvelous.

ACH
Logged
Antonio Chagin
www.achdigital.com

ErikKaffehr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 11311
    • Echophoto
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #12 on: March 04, 2012, 11:40:23 am »

Yes, and let's keep it that way!

Best regards
Erik



We have some very respectable audience in Luminous Landscape. This is marvelous.

ACH
Logged
Erik Kaffehr
 

Christoph C. Feldhaim

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2509
  • There is no rule! No - wait ...
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #13 on: March 04, 2012, 11:50:15 am »

Honestly (and Jeff Schewe is not paying me for that) - since reading "The bible of sharpening" "Real world image sharpening" and changing to PKS am not thinking a lot about sharpening anymore ...

deejjjaaaa

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1170
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #14 on: March 04, 2012, 11:54:24 am »

You would really do capture sharpening and denoise in connection with demosaic.

ACR/LR do not do "sharpening and denoise in connection with demosaic"... everything is done on already demosaicked data in prophoto w/ gamma = 1... so this argument is not relevant for Adobe's raw conversion.

Add to that that ACR has built in contour masks and probably much better noise reduction than the one built in into PhotoShop.

OK, so it is really a question of having a proper NR plugin and being able to built proper contour masks... that's it.
Logged

Ken Bennett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1797
    • http://www.kenbennettphoto.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #15 on: March 04, 2012, 02:19:30 pm »


I might add that I need to work fast in many cases.

You can save a New Camera Raw Default setting with a basic sharpening/noise reduction setting. That speed things up a bit, and you can tweak any individual image as needed, or as you have time. You can have defaults set by ISO and even by individual camera serial number. So, for example, I have defaults for each camera at each ISO setting, with reasonable defaults for noise reduction, capture sharpening, and auto lens correction.

For ISO 100 with a 5D Mark II, my default Details panel is 30/0.7/100/80, and 5/50/0/5/50. That provides a reasonable starting point for capture sharpening and noise reduction in my experience. As noted above, however, the final settings also depend on the subject matter, so you'll want to tweak as needed.
Logged
Equipment: a camera and some lenses. https://www.instagram.com/wakeforestphoto/

ACH DIGITAL

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 613
    • http://www.achdigital.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #16 on: March 04, 2012, 04:06:04 pm »

You can save a New Camera Raw Default setting with a basic sharpening/noise reduction setting.

I usually do.

For ISO 100 with a 5D Mark II, my default Details panel is 30/0.7/100/80, and 5/50/0/5/50. That provides a reasonable starting point for capture sharpening and noise reduction in my experience. As noted above, however, the final settings also depend on the subject matter, so you'll want to tweak as needed.

Why so much masking? can you explain. I'm confuse with the use of this..
Logged
Antonio Chagin
www.achdigital.com

Ken Bennett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1797
    • http://www.kenbennettphoto.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #17 on: March 04, 2012, 07:28:06 pm »

Just trying to keep most of the sharpening effect to the edges. This is probably more important at higher ISO values.
Logged
Equipment: a camera and some lenses. https://www.instagram.com/wakeforestphoto/

David Good

  • Full Member
  • ***
  • Offline Offline
  • Posts: 217
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #18 on: March 05, 2012, 05:27:20 am »

Honestly (and Jeff Schewe is not paying me for that) - since reading "The bible of sharpening" "Real world image sharpening" and changing to PKS am not thinking a lot about sharpening anymore ...

Same here. Time was I used USM in PS but now (I'm embarrassed to admit) I have lost the feel for it, I just choose the type of sharpening required in "PK Sharpener 2" and adjust to taste.
Logged

ACH DIGITAL

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 613
    • http://www.achdigital.com
Re: Sharpening Technique in Camera Raw and Photoshop
« Reply #19 on: March 05, 2012, 07:43:28 am »

Thank you Bennett, Thank you guys. Very interesting topic.
Logged
Antonio Chagin
www.achdigital.com
Pages: [1] 2   Go Up