yes it will do 8x10, but you need a different tank
3005
8x10" Expert Drum, 5 Sheets
Also processes 5x7" sheet film
thanks
But as far as I know, the motor and circuit board should be upgraded in order to handle 3000 series drums unless the CPP-2 processor has a series number of 20456 or up.
Here's from Jobo.com:
There are times when you might want to consider having the Rotation Motor Circuit upgraded in your CPP-2 or CPA-2 Motor Unit. The strength of the circuit depends upon the manufacturing date of your processor. Newer systems like the 3000 series EXPERT Drums, have necessitated the need for increased strength in the Rotation Motor Circuit. You may want to consider upgrading the Rotation Motor Circuit if you experience the rotation speed of the tank or drum being sluggish or seem to struggle with heavier loads. The 3000 series EXPERT Drums create the heaviest possible load for the rotation motor circuit.
The following information will help you know where your unit fits within the range of all of the rotation motor modification upgrades.
From the list below, find which version of motor circuit you have:
Beginning production of the CPP and CPA began with a single bearing rotation motor.
CPP Serial # ARXXXX - 10593
CPA Serial # ARXXXX - 10312
1st Upgrade: Changed single bearing rotation motor to a double bearing rotation motor.
CPP Serial # 10594 - 20455
CPA Serial # 10313 - 13309
2nd Upgrade: Strengthened the rotation motor circuit to accommodate larger loads, i.e. 3000 Drums.
CPP Serial # 20456 - 21999
CPA Serial # 13310 - 21999
3rd Upgrade: Changed to a stronger rotation motor (same as used in the ATL's) and strengthened the rotation motor circuit to accommodate the stronger motor.
CPP Serial # 22000 - present
CPA Serial # 22000 - present