COSMICAR / PENTAX Lenses. Many sizes new never used still in factory boxes.
Other brand Lenses
Dalsa CCD Camera bodies. Some look new, some in sealed anti-static bags: CL-C3-0512N-366J x 3, CL-C3-0512N-STDJ x 4, CL-C3-1024N-204J, CL-CB-1024A-C41H, CL-C3-1024N-STDJ
Pulnix tm-7as async reset high resolution ccd camera. New never used still in factory boxes. More info below.
Pulnix used TM-9701AN Progressive scan w/Lens.
43mm and 52mm close up Lens Sets +1, +2, +4
Cognex 800-5870-1 / In-Sight 5100 In-Sight 5000 Vision Sensor. Install Guide and Quick Start Guide PDFs for this are available at:
http://www.cognexsensors.com/support/Downl...&skin=Jakey ....click on "manuals" More info below.
Hitachi kp-120u Camera body New in box.
40.5mm +1 new in original boxes.
Monitors xcel xlt100514022 and monitronix mid100114rc
cognex continued from above
Comes with software CD, user guide, etc. Price new is $5000.00
"...Machine vision sensor for automated inspection, measurement, identification, alignment, and robot guidance...factory floor..."
www.cognex.comhttp://www.cognex.com/ProductsServices/Vis...lt.aspx?id=1500PDF on this is at:
http://www.cognexsensors.com/support/Downl...&skin=Jakey ...under "manuals"
More info:
http://www.cognexsensors.com/support/Suppo...Section=Support Pulnix tm-7as continued from above
New in box with instruction and warranty card. From enclosed sheet:
B+W shutter camera w/asynchronous reset capability and uniform MTF characteristics. Applications: bar code reading, on-linr inspection, gauging, chaacter readig, high definition graphics, intensifed CCD cameras, and detailed surveillance. Low light sensitivity, on-chip micro lenss. AGC on/off, Gamma selection of 1/0.45 and Frame/Field mode selection switches on the back.
TM-7AS no longer for sale. Least expensive replacement is the TM-7EX
for $799.99 The specifics on the TM-7EX are that it offers a high resolution
interline transfer 1/2" CCD imager in a small, very rugged package. The size of the TM-7EX eliminates the need for a remote imager camera in all but the most confined spaces.
Designed to meet a variety of application requirements, the most commonly needed adjustments, such as gain, gamma, AGC, and field/frame selection, are easily accessible on the rear camera panel. C-mount is also standard.
The camera allows for the external selection of eight different shutter speeds (1/60 sec. to 1/10,000 sec.) by attaching the SC-745 Shutter Controller to the 6-pin connector located on the rear of the camera. The TM-7EX accepts an external sync signal. The camera also includes auto iris outputs and accepts a simple reset that is asynchronous but without a shutter. Dimensions (H x W x L): 39 x 46 x 66 mm
Pictures of above available.
paulgmars@gmail.com st pete florida
