PHOTOSHOP WISH LIST

[dwdallam]

WISH LIST FOR PHOTOSHOP--On topic only. Nothing but wish list, and if those from PS come over to ask questions, answers to those questions.

Auto-Check Spelling before closing document.

 Got a nice surprise after an ad I did last month came out in a magazine with a misspelling. It was one of those words that no one caught, not even the editors, except one person sent an email to my client. He laughed it off, but I was pissed at myself, even though he did have a chance to proof it before press.

I know that will happen again if there is no option to auto spell check. It's inevitable.

[thierrylegros396]

A premium alignement tool is needed like the one used in PTGui !

And if possible supporting a lot of files format !

Thierry

[jerryrock]

WISH LIST FOR PHOTOSHOP--On topic only. Nothing but wish list, and if those from PS come over to ask questions, answers to those questions.

Auto-Check Spelling before closing document.

 Got a nice surprise after an ad I did last month came out in a magazine with a misspelling. It was one of those words that no one caught, not even the editors, except one person sent an email to my client. He laughed it off, but I was pissed at myself, even though he did have a chance to proof it before press.

I know that will happen again if there is no option to auto spell check. It's inevitable.

You are using the wrong tool for the job. Photoshop is not a page layout program. Print advertising is best accomplished using a program like Adobe InDesign.

[mahleu]

Camera Raw support for new cameras for CS3

[ziocan]

You are using the wrong tool for the job. Photoshop is not a page layout program. Print advertising is best accomplished using a program like Adobe InDesign.

I agree.
Using Photoshop for text, it is like using a wine opener to wipe an egg. You can, but...

If some one really has to embed text on an image that cannot be done with indesign, there is always the possibility of writing the text and check spelling it with Word and then pasting it in PS.

[digitaldog]

Spell checking in PS (or any other application) has been doable for me for years, at least on the Mac using Spell Catcher. Works in every application.

[Yoram from Berlin]

Related, but:

I'd like the Adobe Bridge Upload app (the one that pulls my files off my card) to be able to allocate different folders for different file types. Right now it allows me to copy the all the files on the card to a back-up location simultaneously... but I'd like to be able to put RAW files in one, JPGs in another.

[Eric Myrvaagnes]

Spell checking in PS (or any other application) has been doable for me for years, at least on the Mac using Spell Catcher. Works in every application.

Butt as a long-thyme user of computers, eye halve herd often that ewe can't trust spell checkers. Their just knot reliable IMHO. Its best just to reed over what ewe have written.  

[jjj]

I'd like the Adobe Bridge Upload app (the one that pulls my files off my card) to be able to allocate different folders for different file types. Right now it allows me to copy the all the files on the card to a back-up location simultaneously... but I'd like to be able to put RAW files in one, JPGs in another.

Don't see the point in that. Makes for more work having to look in different folders for same shots on a shoot. Plus when you rename RAW files the JPEGs also get renamed when using Bridge and Bridge moves the files together, also a time saver.
And if you don't want to see several file types at same time in Bridge simply use the Filter panel and click file type you want to see.  Plus you can look at several file versions of an image next to each other. The 3 versions will usually look different, so why hunt through 3 folders to compare them.
I keep all file types from a shoot together in one folder, RAW, JPEG, PSD...much easier than separate folders to my mind.

[Chris_Brown]

I'd like all the filters to work in 16-bit mode.

[Wim van Velzen]

It would be nice if it were possible to select a few files at the same time and do the same adjustment (like you can do in ACR). Things like removing a few dust blobs in the sky would be much easier.

[jjj]

It would be nice if it were possible to select a few files at the same time and do the same adjustment (like you can do in ACR). Things like removing a few dust blobs in the sky would be much easier.

So why not do that in ACR? Removing dust spots can be done in ACR en masse.

[jjj]

You are using the wrong tool for the job. Photoshop is not a page layout program. Print advertising is best accomplished using a program like Adobe InDesign.

I agree.
Using Photoshop for text, it is like using a wine opener to wipe an egg. You can, but...

If some one really has to embed text on an image that cannot be done with indesign, there is always the possibility of writing the text and check spelling it with Word and then pasting it in PS.

I sort of agree, but not everyone has InDesign and the text engine in PS was taken directly from InDesign anyway, so it's not such a bad tool for a single page design. Not to mention that you can do a lot more creative/complex stuff with type in PS, though ID has also been getting PS tools in a reverse swap.
PS has been used for graphic design layout for years as it's actually very good at such things.  But it's not so hot for multiple versions/pages as Indesign and now Illustrator, which finally has multiple and varied sized artboards.

When PS's type engine was upgraded some while back, I did an entirely tpe based design in it to test it out and PS did an excellent job.

[dwdallam]

You are using the wrong tool for the job. Photoshop is not a page layout program. Print advertising is best accomplished using a program like Adobe InDesign.

It does the job I need it for perfectly. I don't have much text at all. These are one page or less ad's. I would never try to do brochures or news letters, etc in PS for sure. But the text tool is in PS for a reason, and it's there not to take the place of InDesign, but to allow text to be used in small quantities--just like I'm using it. And since it it there for that function, I think it should have the option to spell check documents before closing them.

What I'm doing is something like this:

[Wim van Velzen]

So why not do that in ACR? Removing dust spots can be done in ACR en masse.

Not if you have a number of tiff files from other raw-converters (like Hasselblad´s in my case) (yes, you can open tiffs in ACR, but that´s a bit too much ado). And it might be my limited experience, but the dust removal tools in ACR fell far short compared to PS.

[john beardsworth]

You know, I suspect you may already be able to make Photoshop do this automatic spellchecking, though I've not the time to test it.

Since CS3 there has been the Events Manager - under File > Scripts. This tells Photoshop to listen for certain events, such as file closing, and trigger a JavaScript. While a JS can potentially do all the work, it might make be easiest to make a simple one which runs an action which initiates spellchecking.

John

[jjj]

Not if you have a number of tiff files from other raw-converters (like Hasselblad´s in my case) (yes, you can open tiffs in ACR, but that´s a bit too much ado). And it might be my limited experience, but the dust removal tools in ACR fell far short compared to PS.

 But even the clone tools work better than in ACR/LR, it won't actually help that much. Doing dust cleaning on a group of images [unless the same composition] is not always going to get the best results, no matter what the programme.
Group work on many images at same time is not what PS is good at anyway. Though batch processing images using actions is great for less specific processes.

[digitaldog]

But even the clone tools work better than in ACR/LR, it won't actually help that much. Doing dust cleaning on a group of images [unless the same composition] is not always going to get the best results, no matter what the programme.
Group work on many images at same time is not what PS is good at anyway. Though batch processing images using actions is great for less specific processes.

If the dust is sensor dust, in the same areas, LR (and presumably ACR) do a great job of bulk correcting. And even if you find a few of hundreds are a tad off, its just a metadata instruction, you're never burning the edit into pixels so its fast and easy to remove or readjust the one image. Even if the images are rotated, the ACR engine does a pretty good job of automatically finding the appropriate source for the clone. Again, not prefect, but pretty darn good and a great fast start to the process. Trying to open clone and save within Photoshop would be agonizingly slow in comparison. But then its a pixel editor, not a parametric editor.

[jjj]

If the dust is sensor dust, in the same areas, LR (and presumably ACR) do a great job of bulk correcting. And even if you find a few of hundreds are a tad off, its just a metadata instruction, you're never burning the edit into pixels so its fast and easy to remove or readjust the one image. Even if the images are rotated, the ACR engine does a pretty good job of automatically finding the appropriate source for the clone. Again, not prefect, but pretty darn good and a great fast start to the process. Trying to open clone and save within Photoshop would be agonizingly slow in comparison. But then its a pixel editor, not a parametric editor.

And why I suggested using ACR/LR instead of PS.

[jerryrock]

It does the job I need it for perfectly. I don't have much text at all. These are one page or less ad's. I would never try to do brochures or news letters, etc in PS for sure. But the text tool is in PS for a reason, and it's there not to take the place of InDesign, but to allow text to be used in small quantities--just like I'm using it. And since it it there for that function, I think it should have the option to spell check documents before closing them.

Nice design by the way. But getting back to using the right tool for the job......... I have to maintain my position about InDesign being the proper tool for print design.
If Photoshop did the job for you perfectly, you would not be complaining about the lack of a spell check engine. Adobe Creative Suite was designed to work together with tight integration; Illustrator for drawing and creating vector art, Photoshop for digital images and InDesign for adding text and combining the elements from the three programs into a final print package. InDesign also has a pre-flight print check that finds inconsistencies with color profiles, missing linked files and fonts. It packages the entire project (into one folder) for output to print including image files and font files.

Jerry