Pages: [1]   Go Down

Author Topic: Captureshop5.6.1, 54H tolerances, 16-shot cameras  (Read 3639 times)

Matt Pearson

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Captureshop5.6.1, 54H tolerances, 16-shot cameras
« on: August 14, 2008, 09:33:18 pm »

The 54H, tethered to a MacPro 2.4 Ghz w/ 8 GB ram and OS 10.4, in 16-shot mode, after the 3rd to 12th shot, the cycle starts over again, and again, and again. Some of the images completed after more than 40 shots. The systems runs fine with the previous versions of Captureshop (which we've switched back to). Any experience or suggestions? eXposure 6 does not list the 54H as a supported camera.

We're in the market for another new (Sinar or other), 16-shot camera. Any suggestions. For anyone representing Sinar, is there any chance of getting our hands on a 75H with multishot capability (I've read earlier posts on the topic).

Also, I have contacted Sinar (Edison)  about tolerances for the 54H's 16 shot mode. Specifically for vibration tolerances. The engineers we've contracted would find it helpful for their survey. I believe Sinar Europe is on vacation for a couple more weeks; does anyone else have the info?

Thanks in advance,
Matt Pearson
Logged

Morgan_Moore

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2354
    • sammorganmoore.com
Captureshop5.6.1, 54H tolerances, 16-shot cameras
« Reply #1 on: August 17, 2008, 06:29:40 am »

Quote
The 54H, tethered to a MacPro 2.4 Ghz w/ 8 GB ram and OS 10.4, in 16-shot mode, after the 3rd to 12th shot, the cycle starts over again, and again, and again. Some of the images completed after more than 40 shots. The systems runs fine with the previous versions of Captureshop (which we've switched back to). Any experience or suggestions? eXposure 6 does not list the 54H as a supported camera.

We're in the market for another new (Sinar or other), 16-shot camera. Any suggestions. For anyone representing Sinar, is there any chance of getting our hands on a 75H with multishot capability (I've read earlier posts on the topic).

Also, I have contacted Sinar (Edison)  about tolerances for the 54H's 16 shot mode. Specifically for vibration tolerances. The engineers we've contracted would find it helpful for their survey. I believe Sinar Europe is on vacation for a couple more weeks; does anyone else have the info?

Thanks in advance,
Matt Pearson
[a href=\"index.php?act=findpost&pid=215097\"][{POST_SNAPBACK}][/a]

try the MF board

S
Logged
Sam Morgan Moore Bristol UK

BobDavid

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3313
Captureshop5.6.1, 54H tolerances, 16-shot cameras
« Reply #2 on: August 18, 2008, 01:45:25 pm »

The Hasselblad CF 39 MS back pumps out better files at 4-shot than any back I've used at 16-shot. The Hassey does 4-shot, not micro-step 16-shot.
Logged
Pages: [1]   Go Up