Z3200 58:10 color sensor error persists after replacing color sensor

[plasakow]

I started having color sensor/ESP errors before replacing the current carriage with a rebuilt unit from LP Computers. When the new carriage failed the ESP test, I asked LP to send a new ESP, which they did, and which I installed. I'm still getting 58:10s while trying to do a color calibration or profile.

Is there anything that could cause this besides the ESP itself?

Thanks.

[kers]

hello Plasakow,

I am having the same problem- did you find a solution?

I put in a sensor that works in an other z3200 so it should be fine, but still it says out of specs...

[degrub]

hello Plasakow,

I am having the same problem- did you find a solution?

I put in a sensor that works in an other z3200 so it should be fine, but still it says out of specs...

do you have a copy of the maintenance/diagnostic manual from HP ?
If not, search the threads from Sharadn . There is a link/copy in there from when we  were helping him troubleshoot.

[plasakow]

hello Plasakow,

I am having the same problem- did you find a solution?

I put in a sensor that works in an other z3200 so it should be fine, but still it says out of specs...

If I recall correctly, with LPS's help I eventually decided it was a firmware thing. Or, in other words, I really don't know.  About a year ago I replaced both my printers with still-in-the-box 2300PSs. I'm going to run those until it no longer makes sense to. The main reason is that, for my use, aftermarket inks make sense. It saves me a ton of money.

[kers]

hello, I just discovered that it is the door of the sensor that does not open...

I have replaced my old service tank with a new one from China - that will be the reason. (If I open the sensor manually ...well timed ... it just works...)

but that means i have to open the right side every time I calibrate.... (!)
I will look into it further, many Thanks to you both for the quick replies...

- as i see now thee is a little piece of metal missing in this new servicetank that takes care of opening the colorsensor, maybe i can put the one from my old tank in...
phew !   it seems you are never finished repairing! but at least i know now what the problem is.

even if you get the right service part by the numbers it is different...