Pages: [1]   Go Down

Author Topic: XRite i1Pro3 (standard aperture) Review  (Read 1153 times)

John Hollenberg

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1079
XRite i1Pro3 (standard aperture) Review
« on: February 06, 2020, 12:22:53 pm »

Here is a review by Scott Martin of Onsight:

https://www.on-sight.com/xrite-i1pro3-standard-aperture-review/
Logged

keithcooper

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
    • Northlight Images
Another XRite i1Pro3 review ;-)
« Reply #1 on: February 20, 2020, 05:22:35 am »

I've also just published a look at the i1Pro3 to go along with the i1Pro3+ one from a few months ago

http://www.northlight-images.co.uk/x-rite-i1photo-pro-3-review/


http://www.northlight-images.co.uk/x-rite-i1photo-pro-3-plus-review/

The kit I've got here is from beta testing I've been doing for a while, so whilst I'm told it's essentially what's now shipped, I've not included any detailed quantitative analysis

JRSmit

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 781
    • Jan R. Smit Fine Art Printing Specialist
Re: XRite i1Pro3 (standard aperture) Review
« Reply #2 on: February 20, 2020, 11:19:47 am »

I am using the i1 pro3 std already and the patch size needs to be a bit larger than the default. This will eliminatie these measurement errors. Is also true for the i1pro2.
Thusfar little difference in results compared to the i1pro2.
Logged
Fine art photography: janrsmit.com
Fine Art Printing Specialist: www.fineartprintingspecialist.nl


Jan R. Smit

belnea

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Another XRite i1Pro3 review ;-)
« Reply #3 on: March 02, 2020, 06:23:23 am »

I've also just published a look at the i1Pro3 to go along with the i1Pro3+ one from a few months ago

http://www.northlight-images.co.uk/x-rite-i1photo-pro-3-review/


http://www.northlight-images.co.uk/x-rite-i1photo-pro-3-plus-review/

The kit I've got here is from beta testing I've been doing for a while, so whilst I'm told it's essentially what's now shipped, I've not included any detailed quantitative analysis
hello
you said :
Minimal Patch Size in Spot Mode: 6 x 6 mm (0.24” x 0.24”) (Width x Height)

Minimal Patch Size in Scanning Mode: 6 x 7 mm (0.24” x 0.28”) (Width x Height) with i1iO; 7 x 7 mm (0.28” x 0.28”) (Width x Height) with sensor ruler; 10 x 7 mm (0.40” x 0.28”) (Width x Height) without sensor ruler
x-rite said : Minimal Patch Size in Spot Mode
14 x 14 mm (0,55” x 0,55”) (largeur x hauteur)
Minimal Patch Size in Scanning Mode:
16 x 16 mm (0,63” x 0,63”) (largeur x hauteur) avec i1iO

Who is right about that?
Logged

JRSmit

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 781
    • Jan R. Smit Fine Art Printing Specialist
Re: XRite i1Pro3 (standard aperture) Review
« Reply #4 on: March 03, 2020, 10:49:56 am »

The only one right is XRite. The i1Pro3+ has different aperture specs than the i1Pro3(std)
The I1Pro3Std has a 4.5mm aperture, so patches of 8.3 to 8.5 should be ok, 8.5 if you want to stick to the ISO standard.

Logged
Fine art photography: janrsmit.com
Fine Art Printing Specialist: www.fineartprintingspecialist.nl


Jan R. Smit

belnea

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: XRite i1Pro3 (standard aperture) Review
« Reply #5 on: March 03, 2020, 03:48:45 pm »

ok. I understand. I didn’t know that x-rite also had a i1pro3 standard. thanks for the clarification
Logged
Pages: [1]   Go Up