Quadtone rip print to small.

[mcrepsej]

I test Quadtonerip on my Epson 9900, but have problems with eg. A4 print becomes 80% of size.
Has set % up to the right size, but had to play a little before the right size was found.
Is this normal?

[Garnick]

I test Quadtonerip on my Epson 9900, but have problems with eg. A4 print becomes 80% of size.
Has set % up to the right size, but had to play a little before the right size was found.
Is this normal?

I haven't used QTR for quite a long time and at the moment I have no time to check the QTR driver to see where the issue might be.  You might want to try the QTR forum here - https://groups.yahoo.com/neo/groups/QuadtoneRIP/conversations/messages.  They usually have just about every issue covered very well as I recall.

[unesco]

I use QTR on daily basis, and IF the image size and resolution are set as you intend, then 100% scaling always gave me the same results as it should be (but used on smaller printers than 9900). QTR makes image interpolation to 720 dpi in background but this should not have any influence to printed image size.