Pages: [1]   Go Down

Author Topic: ploter SC-T7200 missing half fileld nozzle  (Read 952 times)

3cxmostar

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
ploter SC-T7200 missing half fileld nozzle
« on: March 20, 2018, 04:11:34 am »

The plotter Epson SC-T7200 is a new device. Pump cup unit is clear and the ink cartridge  are original. Yesterday Nozzle check  show the lack 50 % of nozzle field, and today without any cleaning print head   the nozzle condition is better.Firmware is new from Epson site.I tried program SC-T series for cap position adjustment,but same problem. I cleaned  the print  head but the failure is repeated after a couple of days of use.
« Last Edit: March 20, 2018, 05:54:20 am by 3cxmostar »
Logged

Farmer

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2848
Re: ploter SC-T7200 missing half fileld nozzle
« Reply #1 on: March 20, 2018, 04:34:50 am »

If this is new, why are you using the service program to make adjustments - you're obviously not a service technician.  Contact Epson.
Logged
Phil Brown

3cxmostar

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: ploter SC-T7200 missing half fileld nozzle
« Reply #2 on: March 20, 2018, 04:58:13 am »

The plotter is two months old and repeats the same error. It works for a few days and then suddenly the nozzles are missing and tomorrow is good.
Logged
Pages: [1]   Go Up