Pages: [1]   Go Down

Author Topic: HELP with CFV 50c screen gridline size  (Read 2011 times)

Neil Williams

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 566
    • Neil's Photography
HELP with CFV 50c screen gridline size
« on: October 18, 2016, 05:44:14 am »

Guys
I've borrowed a CFV50C from my mate but he forgot to give me the screen for my 503CW and I keep chopping of heads. My question is what size is the 1x1 grid as I want to mark it on my original screen???
Any help would be much appreciated
« Last Edit: October 18, 2016, 06:03:22 am by ndwgolf »
Logged

pflower

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 456
Re: HELP with CFV 50c screen gridline size
« Reply #1 on: October 18, 2016, 08:15:10 am »

On mine it measures 3.5cm square.
Logged

Doug Peterson

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4210
    • http://www.doug-peterson.com
Re: HELP with CFV 50c screen gridline size
« Reply #2 on: October 18, 2016, 08:22:43 am »

Guys
I've borrowed a CFV50C from my mate but he forgot to give me the screen for my 503CW and I keep chopping of heads. My question is what size is the 1x1 grid as I want to mark it on my original screen???
Any help would be much appreciated

You can purchase the exact mask for the CFV50c here: https://digitaltransitions.com/product-category/accessories/viewfinder-masks/ just use the one marked for the IQ250 that uses the same sensor.

Neil Williams

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 566
    • Neil's Photography
Re: HELP with CFV 50c screen gridline size
« Reply #3 on: October 18, 2016, 09:48:22 am »

..........what I ended up doing is draw a 35mm square in the existing focus screen with a fine nib red permanent marker.......warmed it up with my old ladies hair dryer and "Bobs your Uncle" it works perfect.
If after my india trip I decide to go out and buy a Hasselblad CFV-50c for myself then it will come with the correct screen, if not then I will just get some heli-fuel or the likes and remove the red pen marks.
Thanks guys
Logged

pembers357

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: HELP with CFV 50c screen gridline size
« Reply #4 on: July 26, 2020, 05:46:42 pm »

You can purchase the exact mask for the CFV50c here: https://digitaltransitions.com/product-category/accessories/viewfinder-masks/ just use the one marked for the IQ250 that uses the same sensor.

Just bought one of these for my 501C and CFV 50C. A very useful recommendation, thanks, as the CFV focus screens are quite rare and very expensive, it seems.
Logged

TechTalk

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 3612
Re: HELP with CFV 50c screen gridline size
« Reply #5 on: July 30, 2020, 07:35:37 pm »

You can purchase a current Hasselblad focusing screen that has the CFV 50C/CFV II 50C sensor format marked by solid lines on the screen along with dashed lines indicating a square crop from the sensor. It has split-image and micro prism focusing aids. Hasselblad US catalog number is H-3042264. Price new is $260.

The fine folks at Capture Integration can likely supply this for you. https://www.captureintegration.com/hasselblad-cfv-ii

Also available at:

https://www.bhphotovideo.com/c/product/1218198-REG/hasselblad_3042264_focusing_screen_for_cfv_50c.html

https://www.adorama.com/HSFSCFV50C/H-3042264
« Last Edit: July 30, 2020, 10:35:51 pm by TechTalk »
Logged
Respice, adspice, prospice - Look to the past, the present, the future
Pages: [1]   Go Up