Pages: [1]   Go Down

Author Topic: Earthquake damage will be affecting Sony CMOS shipments.  (Read 3494 times)

Paul2660

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4079
    • Photos of Arkansas
Earthquake damage will be affecting Sony CMOS shipments.
« on: April 27, 2016, 11:14:38 pm »

Just saw this on the CI blog. Not good news for any brand using Sony.

https://captureintegration.com/sony-pauses-cmos-sensor-operation/

Paul C
Logged
Paul Caldwell
Little Rock, Arkansas U.S.
www.photosofarkansas.com

eronald

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 6689
    • My gallery on Instagram
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #1 on: April 28, 2016, 08:02:26 am »

Just saw this on the CI blog. Not good news for any brand using Sony.

https://captureintegration.com/sony-pauses-cmos-sensor-operation/

Paul C

Let's hope they have stockpiled all they need for P1 and Hassy.
Pentax and Hassy may see launch delays on their new cameras.

Edmund
Logged
If you appreciate my blog posts help me by following on https://instagram.com/edmundronald

Theodoros

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2454
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #2 on: April 28, 2016, 09:24:37 am »

I would expect that if this is the case, there should be a similar announcement by Hasselblad for delaying the delivery of the H6D-100... Lets wait and see then... If Hasselblad doesn't make a similar announcement and they keep with their time table, it then means that there is something else going on...
Logged

Joe Towner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1380
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #3 on: April 28, 2016, 11:03:57 am »

Hassy will be effected, but they'll have enough already to get the -100c out the door in ok numbers.  Pentax, since they haven't announced even, may push that out further.

Logged
t: @PNWMF

Doug Peterson

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4220
    • http://www.doug-peterson.com
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #4 on: April 28, 2016, 11:54:23 am »

Hassy will be effected, but they'll have enough already to get the -100c out the door in ok numbers.  Pentax, since they haven't announced even, may push that out further.

Do you have any source for this, or just speculation?

Joe Towner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1380
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #5 on: April 28, 2016, 01:38:37 pm »

Do you have any source for this, or just speculation?
Sorry, meant to qualify it as speculation, based on previous life in semiconductor manufacturing.  Here are some tidbits - http://image-sensors-world.blogspot.com/2016/04/3rd-sonys-update-on-kumamoto-fab-starus.html
Logged
t: @PNWMF

Theodoros

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2454
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #6 on: April 28, 2016, 02:03:20 pm »

I'm sure that if the Hassy H6D -100 will also be delayed (as Doug implements), there will be a similar (official) announcement by Hasselblad... Lets wait and see...
Logged

Steve Hendrix

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1684
    • http://www.captureintegration.com/
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #7 on: April 28, 2016, 03:39:31 pm »

To be clear - our post is not an official announcement from Phase One. We posted this information resulting from discussions we held with Phase One last week. Phase One has communicated this situation now to all of their dealers.

It was our desire to push this information to our clients, some of whom have wondered whether the earthquake would impact delivery.

There are some contingencies in place in terms of interim equipment solutions from Phase One, as well as Capture Integration, to put clients in the best possible situation with regard to this delay.

I know that Hasselblad is also putting together contingencies.

This event will affect delivery times for everyone (who is dependent on Sony sensors).

While we've painted what we hope is a worse case scenario, the future and details are not set in stone.

I recommend staying in touch with those who have direct contact with the situation as it evolves over the coming weeks and months.


Steve Hendrix/CI
Logged
Steve Hendrix • 404-543-8475 www.captureintegration.com (e-mail Me)
Phase One | Leaf | Leica | Alpa | Cambo | Sinar | Arca Swiss

Paul2660

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4079
    • Photos of Arkansas
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #8 on: April 28, 2016, 06:31:02 pm »

A bit more info, from Sony, posted originally on Fuji Rumors.

"Status of Sony Group Manufacturing Operations Affected by 2016 Kumamoto Earthquakes (Third Update)

Due to the earthquake of April 14, 2016 and subsequent earthquakes in the Kumamoto region, operations at Sony Semiconductor Manufacturing Corporation’s Kumamoto Technology Center (located in Kikuchi Gun, Kumamoto Prefecture), which is the primary manufacturing site of image sensors for digital cameras and security cameras as well as micro-display devices, were halted and currently remain suspended. With aftershocks continuing and employee safety the foremost priority, inspections of the facility and the development of a recovery plan remain ongoing. The current status of operations for the Kumamoto Technology Center is as follows:
Damage to the building itself has been confirmed to be primarily to the upper layer of the building, and reinforcement work will be carried out in this area.
The clean rooms used for wafer processing and manufacturing equipment, both located on the lower layer of the building have not been significantly damaged, and preparations are now underway to resume production. Manufacturing operations are targeted to resume around the end of May 2016.
Regarding back-end processes, such as assembly and measurement, as well as processing operations for components such as camera modules, which are carried out on the upper layer of the building, Sony has confirmed that there is damage to the clean rooms, manufacturing equipment and other equipment. Further analysis of the extent of this damage is currently underway.
Damage to finished product inventory such as image sensors at Kumamoto Technology Center is limited, and shipments of these products have already resumed. The status of semi-finished and uncompleted products is currently being confirmed.
The impact of the earthquakes on Sony Corporation’s (“Sony”) consolidated results continues to be evaluated. In the Devices segment, there is expected to be direct physical damage to Kumamoto Technology Center. Sony expects to incur expenses primarily for recovery and reinforcement work in response to the physical damage to the relevant portion of the Kumamoto Technology Center. Sony may also incur large opportunity losses, mainly in the Devices and Imaging Products & Solutions segments due to suspension of production for a certain period of time.

In addition, due to the suspension of manufacturing operations at Kumamoto Technology Center and potential disruption to the supply of components to Sony from certain third-party suppliers that also have manufacturing facilities in the Kumamoto region, it is possible that business operations within the Mobile Communications, Game & Network Services and Home Entertainment & Sound segments also may be affected. This potential impact is currently being evaluated
."

Paul C
Logged
Paul Caldwell
Little Rock, Arkansas U.S.
www.photosofarkansas.com

william

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 472
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #9 on: April 28, 2016, 10:12:50 pm »

Didn't know the quake was going to have this effect. Lucky to have ordered and received my XF100 when I did....

Logged

Wayne Fox

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 4237
    • waynefox.com
Re: Earthquake damage will be affecting Sony CMOS shipments.
« Reply #10 on: April 29, 2016, 12:54:55 am »

Sorry, meant to qualify it as speculation, based on previous life in semiconductor manufacturing.  Here are some tidbits - http://image-sensors-world.blogspot.com/2016/04/3rd-sonys-update-on-kumamoto-fab-starus.html
well considering that Sony hasn't even come close to supply Phase and deliveries to phase have been seriously constrained for quite some time, I would speculate that Hassbleblad may have only enough sensors to get a modest shipment out the door ... and that may be optimistic.
Logged
Pages: [1]   Go Up