Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: JudyKonopka on August 15, 2019, 11:05:11 pm
-
Hi, I just upgraded to Epson Surecolor Printer Driver 10.16. The black and white prints are purple in parts and similar to something I would use "invert" in Photoshop (solarized looking). This happened on Greyscale files. I was a little low in ink, replaced all my close-to-emty cartridges and it's still the same. Restarted both the Mac and Printer, upgraded to newest version of PhotoShop, performed a nozzel check, and tried different files...I'm lost as to what to do...Any help would be much appreciated.
UPDATE: Performed 3 nozzel cleanings with three tests prints - all is well now. Odd that it happened exactly after I installed the driver, but I'm back. Thanks!
-
10.16 is the one I am using. Without more information start with a nozzle check on the printer. You say that you "replaced all my cartridges". Serious? Only replace when told to.
-
10.16 is the one I am using. Without more information start with a nozzle check on the printer. You say that you "replaced all my cartridges". Serious? Only replace when told to.
I should have said, the close to empty ones. I couldn't afford to replace all of them. I also wrapped them and saved them, even though there was just a little left.
Yea, I'm not crazy.
Nozzel check is fine.
-
I wonder if the update turned on colour control where it wasn't supposed to and you're double profileing? Not sure what that would do to a B&W print (are you using B&W mode?).
-
I wonder if the update turned on colour control where it wasn't supposed to and you're double profileing? Not sure what that would do to a B&W print (are you using B&W mode?).
Do you mean "Color Handling"? Yes, the file is greyscale.
-
Hi, I just upgraded to Epson Surecolor Printer Driver 10.16. The black and white prints are purple in parts and similar to something I would use "invert" in Photoshop. I was a little low in ink, replaced all my cartridges and it's still the same. Restarted both the Mac and Printer, upgraded to newest version of PS, and tried different files...I'm lost as to what to do...Any help would be much appreciated.
Hello Judy,
When you installed the new driver did you make sure you added the Series version of the driver in Systems Prefs, > Printers & Scanners? This is very important. If you have added the Air Printer it will not work as expected, if at all. See the screenshot below and check if your Default Printer is Series or Air Printer. If it is Air you have to delete that printer and reinstall - Series Only.
-
Make sure not to have 16-bit check box on.
-
Hello Judy,
When you installed the new driver did you make sure you added the Series version of the driver in Systems Prefs, > Printers & Scanners? This is very important. If you have added the Air Printer it will not work as expected, if at all. See the screenshot below and check if your Default Printer is Series or Air Printer. If it is Air you have to delete that printer and reinstall - Series Only.
Yes, the series is there. Thanks. :(
-
Yes, the series is there. Thanks. :(
OK, we can count that out. Next -- Did you delete the former driver before installing the update? If not that could perhaps be the problem. There's a specific way of deleting an Epson Printer Diver, but I won't go down that path until you reply to this one.
Which OS are you working with?