Luminous Landscape Forum

Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: mcrepsej on May 17, 2019, 05:29:18 am

Title: Quadtone rip print to small.
Post by: mcrepsej on May 17, 2019, 05:29:18 am

I test Quadtonerip on my Epson 9900, but have problems with eg. A4 print becomes 80% of size.
Has set % up to the right size, but had to play a little before the right size was found.
Is this normal?

Title: Re: Quadtone rip print to small.
Post by: Garnick on May 17, 2019, 08:45:13 am

Quote from: mcrepsej on May 17, 2019, 05:29:18 am

I test Quadtonerip on my Epson 9900, but have problems with eg. A4 print becomes 80% of size.
Has set % up to the right size, but had to play a little before the right size was found.
Is this normal?

I haven't used QTR for quite a long time and at the moment I have no time to check the QTR driver to see where the issue might be.  You might want to try the QTR forum here - https://groups.yahoo.com/neo/groups/QuadtoneRIP/conversations/messages.  They usually have just about every issue covered very well as I recall.

Title: Re: Quadtone rip print to small.
Post by: unesco on May 25, 2019, 09:03:14 am

I use QTR on daily basis, and IF the image size and resolution are set as you intend, then 100% scaling always gave me the same results as it should be (but used on smaller printers than 9900). QTR makes image interpolation to 720 dpi in background but this should not have any influence to printed image size.