Pages: 1 [2]   Go Down

Author Topic: panorama photography questions/problems (gear and software) ACCURATE LEVELING?!  (Read 9317 times)

Glenn NK

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 313

In other words, use the bull's eye bubble level to get you within range, and then use a 2-axis or 3-axis bubble level set to fine tune?

AFAIK yes - but maybe this is approaching perfection in the world of photography.

I guess my point is that the bulls eyes bubbles are NOT very accurate or sensitive even if they are right on.

Transits (older ones) typically used two large horizontal bubbles with very large radii (short radii are less sensitive); levels typically used one bubble and the instrument was rotated 90 degrees to level the other way.  Even if the bubble was not "spot on", by adjusting the instrument so that the bubble stayed in the same position in its "tube", no matter what the rotation, it was very accurate.

I don't know how convenient a level would be in the field (not too), and where one would position it.


I once checked a house on which the builder had used a string level to set the foundations (it clips to a stringline).  The house was 40 feet long and was out of level by eight inches from one end to the other.  And he was puzzled as to why the bubble wasn't accurate.  ::)

He had to re-build the foundation.

Economics:  the study of achieving infinite growth with finite resources

Ellis Vener

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2151

The Sunwayfoto Indexing Rotator DDP-64M with its 10 detent interval options also looks pretty good for spacing pano shots. Has anyone used it?

I have the first model of the Sunway rotator. Am not terribly impressed but it looks like they have made improvements . I do not like having detents on rotators. Different focal lengths on different format cameras have differing rotation needs. It is not that hard to use your brain to keep track of what you are doing.
Pages: 1 [2]   Go Up