Raw & Post Processing, Printing > Printing: Printers, Papers and Inks
z3100 and matte black smudging
Robert Good:
Has anyone encountered matte black smudging / smearing with the z3100.
I read somewhere that this is an issue, but never could find a solution.
I have run into this on Media Ones scrim blockout banner material and an exterior adhesive vinyl product from GS Direct.
I calibrated and created color profiles for each media type with the same results. I have heard I need to limit the saturation of the black spray, but I cannot find any setting within the printer driver, Illustrator or within Photoshop CS4.
I have experimented with Krylon protective spray coating, but it clouds up in temps under 30 degrees.
I am currently looking into an overlaminate, but I really don't want to go there.
I have searched this forum and have been unable to find a similar issue.
Any guidance would be greatly appreciated.
Robert Good
Colorwave:
Not very helpful to you at this point, but I've found the surface of HP Colorfast Adhesive vinyl to be pretty good, in terms of durability. Fairly weak gamut, unfortunately. Is the GS vinyl coated for aqueous printers? If you have to live with the material, you might look into a product called Frog Juice, made for signage, as a liquid coating that is cheaper than laminating film (if cost is your biggest concern).
Robert Good:
--- Quote from: Colorwave ---Not very helpful to you at this point, but I've found the surface of HP Colorfast Adhesive vinyl to be pretty good, in terms of durability. Fairly weak gamut, unfortunately. Is the GS vinyl coated for aqueous printers? If you have to live with the material, you might look into a product called Frog Juice, made for signage, as a liquid coating that is cheaper than laminating film (if cost is your biggest concern).
--- End quote ---
Thanks for the reply. I would stick with an HP product if it wasn't for the price and limitations in performance. I really like the Media One scrim product (except of course for this issue). I just purchased two new rolls and have to find a way to unload the gun pointed at my foot.
I read recently in this other forum that Frog Juice has its limitations. Have you experienced them?
http://printingdigital.net/forums/general-...ed-ink-off.html
b.t.w.
Like your site. simple, clean and easy to navigate.
Colorwave:
Robert-
I've never used it with graphics that require transfer tape over them for registration of cut vinyl elements. The people posting to the thread you linked to are addressing solvent printing on vinyl, FWIW. I assume they were having issues with the bond of their solvent ink to the vinyl being disturbed by the solvent in the coating. Whatever you use, I would imagine spray application, if we are talking liquid vs. film, will be required to not move the MK ink around if it is still smearing. Can you describe your application for this a little more? What are you doing with it, where, etc. Do the manufacturers say that these are aqueous ink compatible?
Also, thanks for the compliment on my site. Had to learn my way around a little web design to do it, as it is only the second site I've ever put together.
Robert Good:
--- Quote from: Colorwave ---Robert-
I've never used it with graphics that require transfer tape over them for registration of cut vinyl elements. The people posting to the thread you linked to are addressing solvent printing on vinyl, FWIW. I assume they were having issues with the bond of their solvent ink to the vinyl being disturbed by the solvent in the coating. Whatever you use, I would imagine spray application, if we are talking liquid vs. film, will be required to not move the MK ink around if it is still smearing. Can you describe your application for this a little more? What are you doing with it, where, etc. Do the manufacturers say that these are aqueous ink compatible?
Also, thanks for the compliment on my site. Had to learn my way around a little web design to do it, as it is only the second site I've ever put together.
--- End quote ---
That's good news. I must have glossed over that thread to quickly. I am using the hp pigment based inks.
This application is primarily for banners. 42"x20' approx. It will endure temperatures from 20 degrees to 100 degrees. Crazy weather here in Montana.
I just want the product to be as indestructible / safe in the hands of individuals that might not care for it as well as I would like.
Navigation
[0] Message Index
[#] Next page
Go to full version