Pages: 1 [2]   Go Down

Author Topic: Ball Head for Hasselblad H6D  (Read 4750 times)

Patricia Sheley

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1112
Re: Ball Head for Hasselblad H6D
« Reply #20 on: January 09, 2018, 08:29:45 pm »

Thanks for that heads up Jim...
Logged
A common woman~

jng

  • Full Member
  • ***
  • Offline Offline
  • Posts: 150
Re: Ball Head for Hasselblad H6D
« Reply #21 on: January 09, 2018, 10:56:56 pm »

Bob Watkins at Precision Camera Works (authorized Arca-Swiss service - https://www.precisioncameraworks.com/about/) can replace the clamp with one from RRS. He turned mine around quickly and his prices are very reasonable. I couldn't be happier with my Cube with this modification.

John

I don't like the C1's flip lock. On one of mine, I've replaced it with a RRS cam-lock, but on the newer ones, they've changed the Loctite spec, and it's difficult/impossible to do that. So my other C1 has a screw lock.

Jim
Logged

Jim Kasson

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2370
    • The Last Word
Re: Ball Head for Hasselblad H6D
« Reply #22 on: January 10, 2018, 10:05:47 am »

Bob Watkins at Precision Camera Works (authorized Arca-Swiss service - https://www.precisioncameraworks.com/about/) can replace the clamp with one from RRS. He turned mine around quickly and his prices are very reasonable. I couldn't be happier with my Cube with this modification.


That's good news. Thanks.

Jim

ErikKaffehr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 11311
    • Echophoto
Re: Ball Head for Hasselblad H6D
« Reply #23 on: January 10, 2018, 12:31:30 pm »

Hi!

Good news, yes! But, I happen to live in Europe. Anyone having a service like that within the EU?

I have an old version D4 and have replaced the Fliplock with an RRS lever type device. That said, the Fliplock is actually quite nice.

Best regards
Erik


That's good news. Thanks.

Jim
Logged
Erik Kaffehr
 
Pages: 1 [2]   Go Up