Pages: [1]   Go Down

Author Topic: Tahoe  (Read 1416 times)

Jonathan Cross

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 754
Tahoe
« on: January 26, 2026, 05:17:44 am »

I have a M1 iMac and a M4 MacBook Air, both running Sequoia.  I am thinking of updating to Tahoe macOS 26.2.  How is it running on all the usual software, LR, Photoshop, pano software etc for anyone who has updated?

Any thoughts would be appreciated.

Best wishes,

Jonathan

Logged
Jonathan in UK

degrub

  • Sr. Member
  • ****
  • Online Online
  • Posts: 2553
Re: Tahoe
« Reply #1 on: January 26, 2026, 08:31:20 am »

i recall that there was not much. Some print drivers etc, had to be reinstalled. search on the forum. Not much came up.
« Last Edit: January 26, 2026, 08:38:19 am by degrub »
Logged

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 21650
  • Andrew Rodney
    • http://www.digitaldog.net/
Re: Tahoe
« Reply #2 on: January 26, 2026, 10:01:34 am »

AOK.
Logged
http://www.digitaldog.net/
Author "Color Management for Photographers".

Christopher Sanderson

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2750
Re: Tahoe
« Reply #3 on: January 26, 2026, 03:03:35 pm »

As long as you have no needed FireWire devices, you should be OK. Firewire is dust in the Tahoe wind.
Logged

tcphoto1

  • Full Member
  • ***
  • Online Online
  • Posts: 167
    • http://www.tonyclarkphoto.com
Re: Tahoe
« Reply #4 on: January 27, 2026, 12:31:24 pm »

I've been running Tahoe Beta for at least six months on my M2 MBP and have had no issues with Capture One and Photoshop. However, only recently has Apple Mail improved reasonably. The app didn't handle spam emails well, I'd mark them as blocked and the app froze for a minute or so. Tahoe 26.3 is much better and I've read that Apple is a month or so away from the Public Release. I have external drives and a Canon Pro-100 printer with USB connectors and use Apple adapters to connect to my MBP and Studio Display and have had no issues but haven't used an old Epson flatbed scanner with Firewire.
Logged

digitaldog

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 21650
  • Andrew Rodney
    • http://www.digitaldog.net/
Re: Tahoe
« Reply #5 on: January 27, 2026, 03:57:44 pm »

How to dual-boot a Mac: Run two versions of macOS together
Here's how to run macOS Sequoia alongside Sonoma, Sonoma with Ventura, or the latest macOS beta in addition to the full macOS on your Mac.
https://www.macworld.com/article/672589/how-to-dual-boot-mac-run-macos-together.html
Logged
http://www.digitaldog.net/
Author "Color Management for Photographers".

Chris Kern

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 2204
    • Chris Kern's Eponymous Website
Re: Tahoe
« Reply #6 on: January 27, 2026, 04:57:18 pm »

How to dual-boot a Mac: Run two versions of macOS together

The simplest approach is to install a separate instance of MacOS on an external drive—preferably a solid-state device connected to the host computer via a Thunderbolt channel.  The process is straightforward; there are plenty of tutorials online that explain how to do this.

Note: Some updates to a newer version of the operating system may modify the host computer's firmware, which could make the older version of the operating system unbootable.  Therefore, it is advisable to have the newer version on the internal drive and the older one on an external drive.

Jonathan Cross

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 754
Re: Tahoe
« Reply #7 on: February 04, 2026, 04:29:32 pm »

Thanks for replies. I have now upgraded to Tahoe on both iMac and MacBook.
Jonathan
Logged
Jonathan in UK
Pages: [1]   Go Up