Pages: [1]   Go Down

Author Topic: Help! Leaf Aptus 22 - Banding and Weirdness Going On!?  (Read 1796 times)

Juanito

  • Full Member
  • ***
  • Offline Offline
  • Posts: 241
    • John Raymond Mireles
Help! Leaf Aptus 22 - Banding and Weirdness Going On!?
« on: July 05, 2011, 05:43:00 pm »

I'm getting occasional banding in the shadows of my photos. It's not in all of my images. It seems to start up then a couple of frames will get these dark lines then it backs off and disappears. So maybe five photos having banding, then are completely jacked up, then a few more have banding before going back to normal. I'm firing Pocket Wizards Plus II's with my H1. Any idea of what might be going on? I had the back serviced by Leaf not all that long ago.





John

design_freak

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1128
Re: Help! Leaf Aptus 22 - Banding and Weirdness Going On!?
« Reply #1 on: July 05, 2011, 05:58:08 pm »

Try another FW cable
Logged
Best regards,
DF

Juanito

  • Full Member
  • ***
  • Offline Offline
  • Posts: 241
    • John Raymond Mireles
Re: Help! Leaf Aptus 22 - Banding and Weirdness Going On!?
« Reply #2 on: July 05, 2011, 06:06:30 pm »

Not a bad idea, but the same thing happened when shooting to a card.

John

yaya

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1254
    • http://yayapro.com
Re: Help! Leaf Aptus 22 - Banding and Weirdness Going On!?
« Reply #3 on: July 06, 2011, 02:57:45 am »

John I suggest that you contact your dealer and provide as much info as possible: firmware/ software version, type of card/ OS etc. and possibly send the back in for a check-up

Yair
Logged
Yair Shahar | Product Manager | Phase One - Cultural Heritage
e: [email protected] |

bcooter

  • Guest
Re: Help! Leaf Aptus 22 - Banding and Weirdness Going On!?
« Reply #4 on: July 06, 2011, 03:13:05 am »

John I suggest that you contact your dealer and provide as much info as possible: firmware/ software version, type of card/ OS etc. and possibly send the back in for a check-up

Yair

Yair's right.  I've seen all this before (except the purple lines).  

I saw it during overheating, over shooting (on a contax) in other words shooting when it went beap instead of counting beep, 1, 2 then shoot but it got fixed.

The good thing is it can be fixed and Leaf can (or could) swap boards out on the camera at Leaf Of America..

I don't know if that exists anymore, but it is a pretty easy fix.

IMO

BC
« Last Edit: July 06, 2011, 03:14:38 am by bcooter »
Logged

Cineski

  • Full Member
  • ***
  • Offline Offline
  • Posts: 140
Re: Help! Leaf Aptus 22 - Banding and Weirdness Going On!?
« Reply #5 on: July 06, 2011, 04:55:24 pm »

Maybe the color of her shirt completely freaking the back out?   ;D
Logged
Pages: [1]   Go Up