Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: Ghaag on April 22, 2015, 09:33:21 am
-
My H4D 40 is stuck in start up mode (see attached picture), I have tried everything I can think of; detach battery, back, lens, etc..., any insight would be greatly appreciated!
-
Swop out the card, if not tried, it may be stuck on access to read it.
-
Chris, thanks for the suggestion! Unfortunately, I have tried swapping out cards, as well as, trying to boot up without a card.
-
restore it to its factory settings.
call them, they will walk you through it.
-
Check the pins/contacts between back and body, make sure they are clean and un-damaged.
-
My H4D 40 is stuck in start up mode (see attached picture), I have tried everything I can think of; detach battery, back, lens, etc..., any insight would be greatly appreciated!
Have you tried other batteries?
Have you refreshed the battery (holding Menu/ISO-WB keys simultaneously at startup)?
Steve Hendrix
Capture Integration
-
Pop the back off the body and connect it via fw800 to a computer?