Luminous Landscape Forum

Equipment & Techniques => Cameras, Lenses and Shooting gear => Topic started by: studio347 on October 10, 2012, 09:16:38 pm

Title: a very specific question for Broncolor
Post by: studio347 on October 10, 2012, 09:16:38 pm
Hi,
Is there any disadvantage to use Broncolor Pulso G4(3200WS) with 1600WS Power Pack(ex_Scoro 1600 s)?
...especially when using those for motion_stop shooting like utilizing 1/8000 s(or 1/10000 s) minimum duration?

And just in case, what would happen if I use a 1600WS head with 3200WS pack at the maximum power setting. other than ruining the tube? Any good guess?

Sorry if this is too much a technical question.
Thanks in advance.
Title: Re: a very specific question for Broncolor
Post by: John Nollendorfs on October 11, 2012, 11:24:05 am
F-stoppers just had an interesting comparison of strobes, including Broncolor, for high speed work, you might look at it?
http://fstoppers.com/which-strobe-has-the-shortest-flash-duration-profoto-broncolor-or-einstein

Title: Re: a very specific question for Broncolor
Post by: studio347 on October 11, 2012, 12:22:44 pm
Thanks. Yes, I'm aware of some discussions regarding this issue. For some reasons, I decided to go with Broncolor. I'm doing some research now for some very specific aspects of Broncolor... especially the aspects of different broncolor flash tubes when combined with fast Bron packs(scoro or grafit) for the fast flash duration setting...
Title: Re: a very specific question for Broncolor
Post by: phila on October 12, 2012, 02:31:09 am
I asked this question to the local importers today. The life of the tube will be shortened but it won't destroy the tube outright.



[quote author=studio347 link=topic=71349.msg565750#msg565750 date=1349918198

And just in case, what would happen if I use a 1600WS head with 3200WS pack at the maximum power setting. other than ruining the tube? Any good guess?

Sorry if this is too much a technical question.
Thanks in advance.
[/quote]
Title: Re: a very specific question for Broncolor
Post by: studio347 on October 12, 2012, 11:06:03 am
Thanks for the reply. Interesting. I was imagining that the tube might explode dangerously and/or the head's electric circuit and power pack might be possibly ruined as well.