Luminous Landscape Forum
Equipment & Techniques => Cameras, Lenses and Shooting gear => Topic started by: David Watson on March 16, 2011, 05:08:02 pm
-
I know that rangefinder cameras have their own special problems on this issue like - it is not an SLR so you cannot see what the filter is doing (duh!). Can I ask what you can do to fit a polarising filter in a usable way to a Leica rangefinder (E39) lens please?
-
I've got one of these for my M8 http://www.robertwhite.co.uk/products.asp?PT_ID=284
-
Hi.
Check : https://www.leicaboutique.com/shop.php?CUR=1&IDC=1&ENC=&IDSC=4
They sell a Leica Universal Polarizing Filter M for under $600 Canadian. Kinda pricey and looks cumbersome.
With my film M's I occasionally, very occasionally, held a Hasselblad polarizer in front of the lens, not that difficult to do since the filter is much larger than almost any Leica lens.
Jean-Michel
-
Thanks guys. The Kenko kit from Robert White looks perfect and I have bought it today!! ;D
-
The Kenko kit looks clever. A slightly more clunky way of doing it is to just paint some marks around the edge of a normal polariser. They don't have to be perfectly spaced as they are just for reference, I just used coloured paint. Then hold the filter before your eye until the effect is right and note which colour is at the top. Screw it on the lens and turn the outer ring to the same position.
Steve
-
Rotate the filter and see through until max effect, then mark the point pointing towards the sun. next time mount and rotate until point is towards sun (angle). Voila, works fairly well with some practice. Also I like that the all my Leica lenses uses the same filter mount size (39mm). I use a B&W and a B&W thin mount larger diameter for my Leitz 18mm.
-
you could always try a non rotating polarizar they're fairly cheap and will remove reflections well enough.