Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: thsinar on February 12, 2009, 03:59:23 am
-
FYI:
The Firmware version 2.11 for the Hy6 camera has been released recently and is available for download from the Sinar site:
www.sinarcameras.com
Log In and go to "Downloads" ---> "Software"
"What is New?":
Version 2.11
• Supports Sinar Hy6 65 and Sinarback eSprit 65 LV
• In order to operate with a Sinar Hy6 with firmware 2.11, a Sinarback eMotion must be equipped with firmware version 5.08 or higher (can be downloaded from Sinar site)
• The Exposure Bracketing now is also supported when using the SCA flash interface
• Long time exposures are no longer aborted by pressing the exposure release button a second time. Now, to abort long time exposures the camera has to be switched off
• The "Flash ready" information on the focusing
screen display has changed.
Remark: The Sinar Hy6 firmware version 2.11 can be used with any Sinar Hy6 cameras as of Hardware Index level 001
Best regards,
Thierry