Luminous Landscape Forum
Equipment & Techniques => Lighting => Topic started by: BernardLanguillier on September 23, 2017, 08:41:24 am
-
Dear all,
I am looking for a cable to connect the trigger out of my H6D-100c to the input of my profoto remote.
Does someone know of such a cable or a combination of cables/adapters that would work?
Thank you.
Cheers,
Bernard
-
is the profoto remote the same connect as a pocket wizard? Should just be a pc to 1/8th inch pigtail.
https://www.bhphotovideo.com/c/product/1000494-REG/pocketwizard_804_310_pc1n_locking_pc_sync.html
-
If you don't mind me asking you what are you trying to do? I have pocket wizards and when I am using them with say my Acute I just slide the PW onto the top of the camera and it triggers the remote flashes...
Dear all,
I am looking for a cable to connect the trigger out of my H6D-100c to the input of my profoto remote.
Does someone know of such a cable or a combination of cables/adapters that would work?
Thank you.
Cheers,
Bernard
-
If you don't mind me asking you what are you trying to do? I have pocket wizards and when I am using them with say my Acute I just slide the PW onto the top of the camera and it triggers the remote flashes...
I am trying to trigger my profoto flash from my digital back mounted on a tech camera.
Cheers,
Bernard
-
3.5mm to 3.5mm audio cable should work - bonus if there's a cold shoe to hold the air remote already.
-
Thanks, I will try that.
Cheers,
Bernard