Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: greyscale on July 06, 2015, 12:44:41 pm
-
Am wondering If it is just mine, or all 3880 default to the network disabled upon power on?. Drives me nuts, I always have to remember to ENABLE the network on the top panel. I have assigned the printer a static address hoping this would change the network to remain ENABLED, but still have to Enable on the panel.
FWIW, I do power off the unit in order to protect it from summer storm power outages and sags.
Greyscale
PS: does the P800 behave this way????
-
My 3800 and 3880 both power up w/ network *enabled* as they should.
You either have a weird unit or not setting/saving the enable state correctly.
-
I have two network attached 3880s, and have never looked at the network settings. They just came up via DHCP and never missed a beat.
-
Never had a problem with mine. Although it is very rare that it is powered down, when it does power up it has no problem with its static IP address.
Brian A
-
Thanks to all for the replies. I must have a zonky network card in mine.
greyscale
-
Finally, figured the (perceived) problem. Reading the Epson Network Guide, Specifically, Steps 13, 14 and 15. Now the 3880 powers on with the correct Ip address every time.
greyscale