Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: nicksimoneau on March 18, 2015, 10:09:32 am
-
Hi guys,
I have a Epson Stylus Pro 9900 (not the proofing edition) and I have issue on every print.
I use the Epson Premium Luster 260 (44in and 24in roll)
If I print a 24x36 (with the 24in roll) the final output is 24x35 7/8
If I print a 24x40 (with the 44in roll) the final output is 24 1/4 x 40
DO you have any solution ? ???
-
Hi guys,
Hi have a Epson Stylus Pro 9900 (not the proofing edition) and I have issue on every print.
I use the Epson Premium Luster 260 (44in and 24in roll)
If I print a 24x36 (with the 24in roll) the final output is 24x35 7/8
If I print a 24x40 (with the 44in roll) the final output is 24 1/4 x 40
DO you have any solution ? ???
Do you experience the same issue when printing on sheet sizes?
-
I dont use sheet so it's hard to say but I'll give a try and let you know.
-
Seem good in sheet mode
-
Seem good in sheet mode
A couple of things come to mind. First--when you create a custom paper size for roll paper printing, what number do you insert in the "Non-Printable Area" section(Top, Left, Right, Bottom)? I'm on a Mac Pro and when I upgraded to OS X 10.9 I found that I had to use .01 in each of those fields in order for the custom paper sizes to print properly. I don't recall the actual issue that prompted that change, but it did take a bit of trial and error to get it right. Perhaps it might work in your case as well, no harm trying. Until 10.9 I always left those fields blank. Next question--do you make sure you have set the scale to 100% in the print dialog. I including a screenshot of the Mac version of that dialog, so if you're on PC it will look a bit different, but that setting would still be available. See below...