Luminous Landscape Forum
Equipment & Techniques => Digital Cameras & Shooting Techniques => Topic started by: David Mantripp on January 12, 2006, 05:37:45 pm
-
Hi,
I've just bought a Lumix LX-1 following Michael's positive comments, and it's a blast. Wonderful little device. The Ricoh GR D nearly got me, but this is more fun.
I downloaded a card to my Epson P2000 to make sure all was well before taking both on a week long trip to the Alps, and I found the P2000 was only listing the JPGs. However, when I connected to my Mac and browsed the folder, I could see the RAWs as well. So the P2000 doesn't support LX-1 RAW, which is no great surprise, but is there any way to see on the P2000 itself a list of files which it cannot display but has copied ?
Thanks.
-
You might check the firmware on your unit. The latest version (02.51) lists nef support for these models: D2X, D2H, D1H, D1X, D100 and D70. I don't know if it would pick up the D200 or not, but it looks like there's hope.
To check the firmware edition in yours, select Settings in the Home menu, then look in the lower right hand corner of the display.
BTW- The pdf instructions with the download caution that you should first update to 02.04 before installing 02.51, should your unit have even older firmware.