Luminous Landscape Forum
Equipment & Techniques => Cameras, Lenses and Shooting gear => Topic started by: maxim on September 15, 2005, 07:02:13 am
-
have a look here
all pics with info ( exif) were taken with Sigma 24-70 EX 2.8.
YES i love this lens
for only 1/3 of the price of CANON 24-70 i think you
couldnt get any better
http://tommyleong.com/ZOO (http://tommyleong.com/ZOO)
-
Although there is very little to tell from such small pictures although even at that size they don't look particularly sharp, probably an issue of USM other than the lens, the 'look' of these pictures is why I sold it after two jobs and over 1000 frames. Not sure if I can quantify it but the contrast is unpleasing to my eye as opposed to the 24-70L which seems to excel (as do all 'L' zooms and canon primes I've used).
That Sigma lens was the lens that taught me that the 'look' of a lens is often as or even more important than the absolute level of objective sharpness. BTW I don't own any Leica gear! :p
-
yeah
i do agree with you
there is a certain haziness over the pics when i
use f2.8.....but i gather the 24-70L has the same
thing too although slightly better
interestingly , of late i have been trying NOT to
USM too much that cause some grainyness
to appear.........
yes, pics looks softer nowadays
hmmmmmmmmmm
maybe i should go back to those old USM settings
-
yeah
i do agree with you
there is a certain haziness over the pics when i
use f2.8.....but i gather the 24-70L has the same
thing too although slightly better
interestingly , of late i have been trying NOT to
USM too much that cause some grainyness
to appear.........
yes, pics looks softer nowadays
hmmmmmmmmmm
maybe i should go back to those old USM settings
Yes, you should go back and use USM or smart sharpening. This recaptures some of the detail blurred out by the antialiasing filter on your camera's sensor.
Be careful, it's easy to over-sharpen, I've done that mistake many times before becoming conservative enough (how you use USM/smart sharpening varies from image to image, and print size to print size, and of course it's different for viewing on web, too).
But I guess part of your problem may also be an unsteady hand, there seems to be some sort of camera motion blur in several of the pictures.
Your pictures aren't helped by aggressive JPEG compression, either, try using at least JPEG "high quality".
This is an example of a shot at 24mm f/2.8 with the 24-70L, EOS 20D, 20% pixel size, USM 0.2 px radius, 300%, JPEG "high quality" from "save for web":
(http://folk.uio.no/jani/hobbies/photo/test/20p/4197_Stig_f2.8.jpg)
There are still slight JPEG artifacts, as you can see, but otherwise, the image isn't that soft.
-
interestingly , of late i have been trying NOT to USM too much that cause some grainyness to appear.........
I usually set my USM threshhold to 4 or 5, and the noise stays back more.
-
I usually set my USM threshhold to 4 or 5, and the noise stays back more.
what about the other parameters ??
actually i am not unhappy with my old USM
but some critique about digital noise/grain
got me thinking maybe the standard for digital is
"too clean"
Jani
could you point out which shots with motion blurr?
it must have skipped me,,,,processed too fast
-
could you point out which shots with motion blurr?
it must have skipped me,,,,processed too fast
These, maybe:
3767, 3768, 3769
A couple of them could also be incorrect focus, it's hard to tell.
3755 seems to me to be lacking in contrast, are the blown-out areas in the background actual sunlight? If so, the problem is that you shot nearly directly into the sun.
There were others, too, but I just picked these four for the example's sake.
-
oh yes
those bird shots and others that did not
have aperture setting ( aperture value =0)
was done with manual lens
Mostly focus error and some handshake
you were right
-
I used 230,1,0 on my 10D, 250 on the 1Ds. For anything larger than a 9X6" print I run a custom edge sharpen of my own.
-
thanks
i will give that a try
and maybe load an entirely new set of photos
done with sigma24-70 only at f2.8