Luminous Landscape Forum

Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: Alun on May 10, 2012, 05:39:27 am

Title: Arca-Swiss Rm3di Dimensions
Post by: Alun on May 10, 2012, 05:39:27 am

Does anyone have the dimensions of the Arca-Swiss Rm3di for the base unit excluding the viewfinder/lens/back.

Thanks in advance
Alun

Title: Re: Arca-Swiss Rm3di Dimensions
Post by: mjon on May 11, 2012, 04:52:43 am

Not sure how the measurements have been taken but this might help you:

http://www.luminous-landscape.com/forum/index.php?topic=49955.msg411921#msg411921

mjon

Title: Re: Arca-Swiss Rm3di Dimensions
Post by: Alun on May 11, 2012, 11:24:50 am

Thats brilliant Mjon! Thanks for your help

Alun

Title: Re: Arca-Swiss Rm3di Dimensions
Post by: Rod.Klukas on May 11, 2012, 12:07:51 pm

Quote from: Alun on May 10, 2012, 05:39:27 am

Does anyone have the dimensions of the Arca-Swiss Rm3di for the base unit excluding the viewfinder/lens/back.

Thanks in advance
Alun

Hi Alun,

Rm3di dimensions are:
Camera height from the foot to top of the viewfinder mount - 8 3/8"
Camera width, including knobs - 7 3/4"
Camera depth, including knobs - 2"

If you are nearby - I'll be demonstrating the Arca-Swiss Rm3di, D4 and C-1 Cube tripod heads next week at the Digital Transitions Open House event in Dallas, Houston and Denver. Details of the event are here: http://bit.ly/ISzqj6

Also, an Rm3di introduction video available to watch here:
http://rodklukas.com/video/

Hope that helps,

Rod

Title: Re: Arca-Swiss Rm3di Dimensions
Post by: lance_schad on May 11, 2012, 01:09:13 pm

Doug and I will also be demonstrating the Arca-Swiss Rm3di, D4 and C-1 Cube tripod heads along with Capture One Training at our events in Boston on June 1 and June 2.
More details are HERE (https://digitaltransitions.com/event/event/phase-one-mamiya-leaf-open-house-boston)

Lance

Title: Re: Arca-Swiss Rm3di Dimensions
Post by: Alun on May 13, 2012, 01:27:39 pm

Rod and Lance,

I'm based in the UK unfortunately but thank you so much for the information Rod. I have just ordered an Rm3di with Leaf Aptus II 7 and the Schnieder 35mm Digitar and the reason for the question was to see if the Rm3di would fit in my F-Stop ICU that I have - it will! I have seen your excellent videos several times already Rod and it was instrumental in making my decision over an Alpa as information on the Arca-Swiss products is hard to come by in the UK or on the 'net as you'll know.

On a separate note, do either of you have a recommendation for a loupe (magnification?) to use with this setup?

Many thanks again
Alun

Title: for sale Ingrandisci Schneider-Kreuznach lens APO DigiTar XL 5.6 35 mm
Post by: maurizio montagna on July 22, 2012, 11:01:44 am

I for sale:

 
Schneider-Kreuznach lens APO DigiTar  XL 5.6 35 mm for Rm3D,               

Schneider-Kreuznach APO DIGITAR XL 5.6 35mm XL for Rm3D lens like a new perfect condiiton lens and shutter, box, not used.


http://www.ebay.it/itm/110921012266?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649