Luminous Landscape Forum

Raw & Post Processing, Printing => Colour Management => Topic started by: Paz on January 26, 2012, 02:46:29 pm

Title: What do these numbers mean?
Post by: Paz on January 26, 2012, 02:46:29 pm

Below is the 'Report' of my i1DisplayPro calibration.  What do the numbers mean?

thanks,

Paz

(http://www.patriceart.com/calibration/report_i1_profile_jan_26_2012.jpg)

Title: Re: What do these numbers mean?
Post by: digitaldog on January 26, 2012, 02:48:59 pm

Nothing very useful. Sorry. Does the display calibration and profile produce an acceptable visual match to the print? That is what counts.

Title: Re: What do these numbers mean?
Post by: WombatHorror on January 26, 2012, 08:14:50 pm

Quote from: Paz on January 26, 2012, 02:46:29 pm

Below is the 'Report' of my i1DisplayPro calibration.  What do the numbers mean?

thanks,

Paz

(http://www.patriceart.com/calibration/report_i1_profile_jan_26_2012.jpg)

first dE76 is old and not the best setting to use on the result screen (a 15dE tolerance is pretty large too, it wouldhave to be quite poor to fail that test)

second that the profile appears to have worked out with pretty solid consistency, at least over the range covered by the 24 samples, since the same probe verifies it it doesn't mean anything is accurate, things could be insanely wrong, and still show to have low error, but it does show that the profile+monitor combination appear to be behaving very well otehr than for two patches and not too horribly even for those so you aren't get nasty twists or non-linearity errors all over the place and saturation curves going horribly wrong, etc. (although 24 patches isn't a very large check)