Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: LukeB on February 09, 2011, 11:51:15 am
-
Hey Guys and Gals
Ive just borrowed a friend aptus 22 on my Hassy 503cw and im having real trouble tethering it to capture one. I may be mistaken but i thought it was supported in Capture one DB?
Is that i can only use it with Pro? Works fine in Leaf capture, but would much prefer to use C1.
cheers
-
Sorry guy, just found the info that i was looking for. C1 pro only. :-\
-
Hi,
I use the Mamiya DM22, which is a rebranded Aptus-22.
I had similar question when i mounted the DM22 to a RZ 67 Pro II and not on the Mamiya 645 DF which came with the back
It should work with C1 DB:
1. start C1
2. eventually you need to 'install Leaf drivers'
3. define the correct body in camera preferences
4. connect the Aptus-22
5. everything should be fine from here
Nicolas
-
Is the problem with live view or does it not recognize the back at all?
With older versions of Capture One, you will need the live view dongle. I've never used the Aptus-I, only the Aptus-II, so I've never had to use a dongle.
Yair could give you the correct information on this.
-
Aptus 22 requires Capture One PRO
Live View works without a dongle on mechanical cameras e.g Hassy V, RZ, Sinar etc.
DM22 works with Capture One DB
Live View works without a dongle also on 645AFDIII, 645DF and RZ-IId
HTH
Yair
-
What about older versions of capture one?
-
What about older versions of capture one?
There is no difference between 5.2.1 and 6.1 with regards to support for the above backs
Yair