Luminous Landscape Forum

Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: EricDosSantosPhotography on July 18, 2010, 12:11:41 am

Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: EricDosSantosPhotography on July 18, 2010, 12:11:41 am
So I have capture one pro 5.1.2 and a leaf aptus 17 back. When I connect the back to the macbook it doesn't recognize the back. Am I doing something wrong? I think it is supposed to recognize it right away.

Thank You,
Eric
Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: rethmeier on July 18, 2010, 12:37:07 am
In the Capture One menu, before connecting the back, go to Preferences>Capture and select the correct Camera type and then connect the back.
Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: EricDosSantosPhotography on July 18, 2010, 01:17:58 am
I've done that and even tried some other bodies and still didn't work...  Another get at Getdpi said it doesn't work with leaf backs unless you send them in to get updated to allow it.

Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: yaya on July 18, 2010, 01:42:47 am
Quote from: EricDosSantosPhotography
I've done that and even tried some other bodies and still didn't work...  Another get at Getdpi said it doesn't work with leaf backs unless you send them in to get updated to allow it.

Eric,

In Capture One, go to the Capture One menu>Install Leaf Drivers and 4 seconds later the back will connect to the software

Enjoy

Yair

Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: digitalcameraman on July 19, 2010, 07:19:05 am
Quote from: EricDosSantosPhotography
So I have capture one pro 5.1.2 and a leaf aptus 17 back. When I connect the back to the macbook it doesn't recognize the back. Am I doing something wrong? I think it is supposed to recognize it right away.

Thank You,
Eric



It was my understand too, that all older Leaf backs were not compatible with Capture 5 Pro unless they had been sent back to service for an firmware update for a charge.

AI know that ll new Leaf Aptus II camera backs work right out of the box with Capture One 5 Pro. You have to select which one you are using and it will load a driver if it is not up to date.




Sincerely,

Chris Snipes
Sales Manager, Florida
Capture Integration
http://www.captureintegration.com (http://www.captureintegration.com)

Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More

404.522.7662  Atlanta
305.350.9900  Miami
877.217.9870  National
813.335.2473  Cell
Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: digitalcameraman on July 19, 2010, 09:14:48 am
Correction:

Doug Petersen, Technical Manager for Capture Integration has pointed out to me that Capture One DB and Capture One Pro 5 now support the new Aptus II camera backs, and many of the older Aptus backs that had the original firmware. So that now means I was incorrect in stating that only currently  Aptus II backs are supported in my last post regarding this thread. This has changed since the Leaf Dealer meeting earlier this year where I based my information on.

So there you have it. Use most all Aptus and Aptus Ii backs in Leaf Capture or Capture One DB or Pro.


Sincerely,

Chris Snipes
Sales Manager, Florida
Capture Integration
http://www.captureintegration.com (http://www.captureintegration.com)

Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More

404.522.7662  Atlanta
305.350.9900  Miami
877.217.9870  National
813.335.2473  Cell

Sign up for our Email Newsletter
Subscribe to our RSS Feed





Quote from: digitalcameraman
It was my understand too, that all older Leaf backs were not compatible with Capture 5 Pro unless they had been sent back to service for an firmware update for a charge.

AI know that ll new Leaf Aptus II camera backs work right out of the box with Capture One 5 Pro. You have to select which one you are using and it will load a driver if it is not up to date.




Sincerely,

Chris Snipes
Sales Manager, Florida
Capture Integration
http://www.captureintegration.com (http://www.captureintegration.com)

Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More

404.522.7662  Atlanta
305.350.9900  Miami
877.217.9870  National
813.335.2473  Cell
Title: Leaf back with Capture one not showing up when tethered. HELP!
Post by: Steve Hendrix on July 19, 2010, 10:52:10 am
Quote from: digitalcameraman
Correction:


So there you have it. Use most all Aptus and Aptus Ii backs in Leaf Capture or Capture One DB or Pro.


Sincerely,

Chris Snipes
Sales Manager, Florida
Capture Integration
http://www.captureintegration.com (http://www.captureintegration.com)

Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More

404.522.7662  Atlanta
305.350.9900  Miami
877.217.9870  National
813.335.2473  Cell

Sign up for our Email Newsletter
Subscribe to our RSS Feed



To be completely specific:

Capture One DB Support, file compatibility and tethered (Free)
*All Leaf Aptus II (II-5, II-6, II-7, II-10, II-10R)

Capture One Pro Support, file compatibility and tethered ($399)
*All Leaf Aptus (17, 22, 65, 75, 54-S, 65-S, 75-S)


(FYI - ordering Capture One Pro from us results in a 10% discount on C1 Pro for the buyer, click the link below)



Steve Hendrix