Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: ucs308 on December 16, 2009, 01:13:31 am
-
I am on the path to getting a MF digital back that will work with the Horseman SWD II or the Cambo WDS or WRS. I am looking at the PhaseOne P40+ since this seems to be recommended for wide angle work.
The specs say exposure time is limited at 1 minute. Is this true even manually?
-
I am on the path to getting a MF digital back that will work with the Horseman SWD II or the Cambo WDS or WRS. I am looking at the PhaseOne P40+ since this seems to be recommended for wide angle work.
The specs say exposure time is limited at 1 minute. Is this true even manually?
yes.
-
you will want to go with a P25+ or 45+ for movements and long exposures. these can go for longer but consider ISO 200 as a max clean ISO without any compromises. while the 40+/65+ are limited to 1 min they do much better ISOs, so that 1 min is equiv to a longer exp. so the gap closes. i have a reg P25 non plus and a WDS, the WDS is great i recommend it.
-
I am on the path to getting a MF digital back that will work with the Horseman SWD II or the Cambo WDS or WRS. I am looking at the PhaseOne P40+ since this seems to be recommended for wide angle work.
The specs say exposure time is limited at 1 minute. Is this true even manually?
The back does not stop you from taking a longer exposure; the quality is simply very poor once you pass a certain amount of exposure time. The point being that it doesn't matter what mode/manner you use to trigger the capture the maximum exposure is limited by image quality concerns.
I'm testing the recently released Phase One P40+ firmware 4.8.2 right now as I type with Capture One 5.0.1. First glance results are that 50 seconds at ISO100 or 70 seconds at ISO50 (ambient temperature of 73 degrees F) are the longest exposures one can achieve with good results. After that quality drops quickly.
If you have the budget for a P40+ then I would look instead at a P45+ which will give you the best long exposures available in medium format (up to an hour at normal temperatures, many hours in very cold weather) at the same resolution (39 megapixels) with good compatibility with your tech cameras.
Doug Peterson ()
__________________
Head of Technical Services, Capture Integration
Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More
National: 877.217.9870 | Cell: 740.707.2183
Newsletter: Read Latest or Sign Up (http://www.captureintegration.com/our-company/newsletters/)
RSS Feed: Subscribe (http://www.captureintegration.com/2008/08/11/rss-feeds/)
Buy Capture One at 10% off (http://www.captureintegration.com/phase-one/buy-capture-one/)
-
doesn't the p40+ have the microlenses? if so, isn't that kind of a no-no for camera movements, even tilt, due to color casts?
but I'd 2nd what doug said about the p45+, bigger chip, bigger pixels, longer exposure times(if needed).
great backs, should work for years.
-Dan
-
it does have ML but it can do movements, apparently the problem has been solved with software i think. i think i has less color cast than a P25/45...i think
-
doesn't the p40+ have the microlenses? if so, isn't that kind of a no-no for camera movements, even tilt, due to color casts?
but I'd 2nd what doug said about the p45+, bigger chip, bigger pixels, longer exposure times(if needed).
The P40+ works extremely well on a tech/view camera. It has less color cast / fall off than a P45+.
Doug Peterson ()
__________________
Head of Technical Services, Capture Integration
Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More
National: 877.217.9870 | Cell: 740.707.2183
Newsletter: Read Latest or Sign Up (http://www.captureintegration.com/our-company/newsletters/)
RSS Feed: Subscribe (http://www.captureintegration.com/2008/08/11/rss-feeds/)
Buy Capture One at 10% off (http://www.captureintegration.com/phase-one/buy-capture-one/)
-
you will want to go with a P25+ or 45+ for movements and long exposures. these can go for longer but consider ISO 200 as a max clean ISO without any compromises. while the 40+/65+ are limited to 1 min they do much better ISOs, so that 1 min is equiv to a longer exp. so the gap closes. i have a reg P25 non plus and a WDS, the WDS is great i recommend it.
Note that you generally cannot increase the ISO to get past the maximum good exposure time on a P40+. Anything above ISO100 is in-suitable for long exposures.
When I get a chance to review the files from tonight I'll give you a more detailed answer, but after an initial look at tonight's testing 50 seconds on ISO100 is the most I think one can get from the P40+ for long exposures using the latest firmware/software.
Doug Peterson ()
__________________
Head of Technical Services, Capture Integration
Phase One, Leaf, Cambo, Canon, Apple, Profoto, Eizo & More
National: 877.217.9870 | Cell: 740.707.2183
Newsletter: Read Latest or Sign Up (http://www.captureintegration.com/our-company/newsletters/)
RSS Feed: Subscribe (http://www.captureintegration.com/2008/08/11/rss-feeds/)
Buy Capture One at 10% off (http://www.captureintegration.com/phase-one/buy-capture-one/)
-
If you have the budget for a P40+ then I would look instead at a P45+ which will give you the best long exposures available in medium format (up to an hour at normal temperatures, many hours in very cold weather)
after 20 minutes the batteries are empty , but I agree the files are wonderful
-
Take a look also at the Hasselblad system of backs also for the Horseman & Cambo. I have heard Hasselblad & Beta Testers are testing new firmware/software for doing exposures over the current 64 seconds, with no additional calibration exposure. A 5 minute exposure is just 5 minutes.
Best,
Rich Andres
Foto Care
I am on the path to getting a MF digital back that will work with the Horseman SWD II or the Cambo WDS or WRS. I am looking at the PhaseOne P40+ since this seems to be recommended for wide angle work.
The specs say exposure time is limited at 1 minute. Is this true even manually?