Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: mikev1 on November 21, 2009, 02:26:00 am
-
Hello, on larger prints I'm getting a lot of blank prints sent to the printer or only the top 1/4 or so of the image is printing on the bottom 1/3 of the stated paper dimensions.
I suspect this is a problem with the amount of RAM etc and has nothing to do with the 9900 per se.
I try to always check print preview to avoid sending blank or partial images to the printer so I'm not wasting any paper but it is an annoyance. I do forget though time to time. It doesn't seem to matter whether it is Phtoshop or Qimage really, though most of the problems are through photoshop.
I am running an vista computer with a Q6600 with 4GB's of RAM.
I generally have to send the file three of four times to get the full image to appear or print.
Anyone having similar issues?
Mike
-
Hello, on larger prints I'm getting a lot of blank prints sent to the printer or only the top 1/4 or so of the image is printing on the bottom 1/3 of the stated paper dimensions.
I suspect this is a problem with the amount of RAM etc and has nothing to do with the 9900 per se.
I try to always check print preview to avoid sending blank or partial images to the printer so I'm not wasting any paper but it is an annoyance. I do forget though time to time. It doesn't seem to matter whether it is Phtoshop or Qimage really, though most of the problems are through photoshop.
I am running an vista computer with a Q6600 with 4GB's of RAM.
I generally have to send the file three of four times to get the full image to appear or print.
Anyone having similar issues?
Mike
I am having the same problem printing to my HP Z3100 when printing through Photoshop CS4. I didn't have the problem with PS CS3, and I can print fine using either Lightroom 2 or Qimage. It happens to me regardless of file size, so I'm careful to check the print preview before proceeding with a print.
Mary
-
Hello, on larger prints I'm getting a lot of blank prints sent to the printer or only the top 1/4 or so of the image is printing on the bottom 1/3 of the stated paper dimensions.
I suspect this is a problem with the amount of RAM etc and has nothing to do with the 9900 per se.
I try to always check print preview to avoid sending blank or partial images to the printer so I'm not wasting any paper but it is an annoyance. I do forget though time to time. It doesn't seem to matter whether it is Phtoshop or Qimage really, though most of the problems are through photoshop.
I am running an vista computer with a Q6600 with 4GB's of RAM.
I generally have to send the file three of four times to get the full image to appear or print.
Anyone having similar issues?
Mike
Years ago while using PS7 I used to have a problem with partial prints coming out on my 7600. I solved the problem by allocating less memory to Photoshop. This seemed counter intuitive but it worked. - Paul
-
Are you printing over USB or network? if network, try this program
http://www.epson.co.uk/Printers-and-All-In...Y_CODE=NETUTILS (http://www.epson.co.uk/Printers-and-All-In-Ones/Large-Format/Epson-Stylus-Pro-7900/Drivers-Support?target=driver&languageId=1&driverId=318985&defaultOSId=16&DRV_CATEGORY_CODE=NETUTILS)
-
I have the same problem with my 3800. I think it is a RAM problem (as in not having enough). A restart of my computer has always fixed the problem. That's why you should always do a Print Preview. It has saved me loads of paper.