Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: duraace on September 25, 2009, 07:39:05 pm
-
In photo paper mode, total black areas on the gray scale image appear lighter and shiny in light, instead of pure black. Any suggestions?
-
Sounds like it may be overinking. What paper are you using?
-
Sounds like it may be overinking. What paper are you using?
Using Epson Exhibition Fiber with Premium Luster set in the driver as paper type.
-
Are you perhaps just noticing glare reflected onto that black area? If so, that is normal.
-
In my tests of this paper with the 3800, while EEF can achieve a slightly higher dmax with the premium luster setting, using the premium glossy setting instead results in a smoother curve all the way through the maximum densities until the very last step where there is a very slight reversal. With the luster setting, there is a more significant reversal in the curve near the top end where it drops from 2.61 to 2.58 and then recovers, and reverses again! You probably have to hit it with a lot of light to really see that, but it might be part of your problem.
I'd try the premium glossy setting and see if it's better.
Good luck and Aloha,
Aaron
-
In my tests of this paper with the 3800, while EEF can achieve a slightly higher dmax with the premium luster setting, using the premium glossy setting instead results in a smoother curve all the way through the maximum densities until the very last step where there is a very slight reversal. With the luster setting, there is a more significant reversal in the curve near the top end where it drops from 2.61 to 2.58 and then recovers, and reverses again! You probably have to hit it with a lot of light to really see that, but it might be part of your problem.
I'd try the premium glossy setting and see if it's better.
Good luck and Aloha,
Aaron
I also see it on IFORD Gold Fibre Silk using the Semi Gloss setting. I can see it with no light shining on the surface. It has what I would describe as a somewhat 'milky' appearance.
-
Using Epson Exhibition Fiber with Premium Luster set in the driver as paper type.
Epson recommend using Premium Glossy as the setting. As others have already noted, try that and see if there is a difference. I have not observed what you see in my B&W printing.
-
Epson recommend using Premium Glossy as the setting. As others have already noted, try that and see if there is a difference. I have not observed what you see in my B&W printing.
Problem solved I think. I did a head nozzle check, and the black ink indicated very clogged. Did one head cleaning, and still a very minor indicator, so I'm doing another. That should fix the problem.
-
Problem solved I think. I did a head nozzle check, and the black ink indicated very clogged. Did one head cleaning, and still a very minor indicator, so I'm doing another. That should fix the problem.
Bingo ... head clog. Looks like a million bucks again.