Luminous Landscape Forum

Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: Paul Eby on April 15, 2009, 07:07:26 am

Title: Maintenance tank reset on a 7900?
Post by: Paul Eby on April 15, 2009, 07:07:26 am

Is there a way to reset the % usage of the maintenance tank on a 7900? We use to do this on our 7600. - Paul

Title: Maintenance tank reset on a 7900?
Post by: Ryan Grayley on April 15, 2009, 03:08:11 pm

Quote from: Paul Eby

Is there a way to reset the % usage of the maintenance tank on a 7900? We use to do this on our 7600. - Paul

Have you tried a chip resetter?

Title: Maintenance tank reset on a 7900?
Post by: D White on April 16, 2009, 12:57:46 am

Does anyone know of which chip resetter will work? I have one that worked on my previous 7600 and 7800, but I am suspicious it will not work on my current 7900. I do not want to try it out until I get a replacement maintenance tank, to avoid finding out the reseting corrupts it and renders it useless.

Title: Maintenance tank reset on a 7900?
Post by: Paul Eby on April 16, 2009, 07:25:59 am

Quote from: Ionaca

Have you tried a chip resetter?

No, on the 7600 resetting was possible through the menu system. I assume that because of the chip this is not possible any longer?

Title: Maintenance tank reset on a 7900?
Post by: Ryan Grayley on April 16, 2009, 08:42:52 am

Quote from: Paul Eby

No, on the 7600 resetting was possible through the menu system. I assume that because of the chip this is not possible any longer?

I don't think the 7900 has this option within the menus.

However, I have successfully reset a 9600 maintenance cartridge with a chip resetter. The 9600 uses the same maintenance tank as the 7900 so a chip resetter may work but I have yet to try this with a 7900.

So will anyone take the chance?

Perhaps the worst that could happen is an unusable maintenance tank. But if reseting the chip is performed when the tank is full then perhaps it doesn't really matter too much as a new thank would be needed anyway.

Ryan

Title: Maintenance tank reset on a 7900?
Post by: macz5024 on April 16, 2009, 05:07:31 pm

Quote from: Ionaca

I don't think the 7900 has this option within the menus.

However, I have successfully reset a 9600 maintenance cartridge with a chip resetter. The 9600 uses the same maintenance tank as the 7900 so a chip resetter may work but I have yet to try this with a 7900.

So will anyone take the chance?

Perhaps the worst that could happen is an unusable maintenance tank. But if reseting the chip is performed when the tank is full then perhaps it doesn't really matter too much as a new thank would be needed anyway.

Ryan

The chip resetter that works on the 9600 and 9800 does not work on the 9900/7900 anymore. You can "reset" the chip but the printer will tell you that you try to cheat  I am glad I had a spare one when I tried this...

Markus

Title: Maintenance tank reset on a 7900?
Post by: sergio on April 17, 2009, 10:47:43 am

Can anyone tell me how to do it with the 7600? Thanks.

Title: Maintenance tank reset on a 7900?
Post by: Paul Eby on April 17, 2009, 02:04:43 pm

Quote from: sergio

Can anyone tell me how to do it with the 7600? Thanks.

- turn off printer
- press PAPER SOURCE+PAPER FEED+CUT/EJECT buttons at the same time and keep them pressed
- turn on the printer
- release the buttons
- a new hidden menu appears
- press DOWN, CLEAR COUNTERS option should appear
- press RIGHT
- press UP, MAINT TANK should appear
- press RIGHT
- press ENTER (CUT/EJECT button)
- done!