Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: archivue on March 24, 2009, 02:32:33 pm
-
is there a sliding back that can handle a 35 lens with an arca swiss Fline 69 ?
Kapture one ? Arca Rotaslide ? Cambo ? Silvestri ?
Best lens for that use ? 35 XL or 35 apo sironar Digital ?
i know that the new digaron 40 should be better, but i really need a 35, not 40 !
thanks.
-
Another idea... would you consider shooting tethered and using Live View? That way your sensor can be permanently in place and you only need a simple fixed adapter (and this is my view cam solution).
http://luminous-landscape.com/forum/index....w=&st=& (http://luminous-landscape.com/forum/index.php?showtopic=19884&pid=142406&mode=threaded&show=&st=&)
-
Another idea... would you consider shooting tethered and using Live View? That way your sensor can be permanently in place and you only need a simple fixed adapter (and this is my view cam solution).
http://luminous-landscape.com/forum/index....w=&st=& (http://luminous-landscape.com/forum/index.php?showtopic=19884&pid=142406&mode=threaded&show=&st=&)
a computer for architecture... no way !
same live view as a 5D on the back screnn will be superb... just a dream !
-
a computer for architecture... no way !
??
You will have massive storage and huge on-screen previews which make focus confirmation easy and you can use live view. Lots of advantages.
-
The Rotaslide is the thinnest and technically can handle even the Rodenstock 28mm HR, but as it is thin it also flexes which can make accurate focusing a bit difficult in certain situations.
PM me and I'll give you some names of architecture photographers who use the Rotaslide on their F69
Yair
-
A 35mm lens on a MFDB is not enough for professionel architectural work.
Better you use a Linhof Technar or Sinar artec, both have sliding backs and they can handle a 23mm.
With the Linhof you can use your lenses(changing plate).
The last days I used liveview with a laptop mounted on the tripod of the camera.
It was easier than I expected.
Michael
-
A 35mm lens on a MFDB is not enough for professionel architectural work.
Better you use a Linhof Technar or Sinar artec, both have sliding backs and they can handle a 23mm.
With the Linhof you can use your lenses(changing plate).
The last days I used liveview with a laptop mounted on the tripod of the camera.
It was easier than I expected.
Michael
enought for me... anyway, if sometimes i need to go larger i can stitch !
in 4x5, my shorter end is 80, but i prefer to use the 110 if i can.
in 6x8, i use a superb 58xl linhof selected
in 24x36 5D markII i use 24 TS-E, ans few times i use stitching.
Anyway, i will be able to buy a 23 later, and use it without the sliding back !
-
The Rodenstock 35mm HR works with both Rotaslide and Kapture Group sliding backs. I found the Rotaslide to be too flimsy to get accurate focus. The Kapture Group sliding back works very well.
is there a sliding back that can handle a 35 lens with an arca swiss Fline 69 ?
Kapture one ? Arca Rotaslide ? Cambo ? Silvestri ?
Best lens for that use ? 35 XL or 35 apo sironar Digital ?
i know that the new digaron 40 should be better, but i really need a 35, not 40 !
thanks.
-
The Rodenstock 35mm HR works with both Rotaslide and Kapture Group sliding backs. I found the Rotaslide to be too flimsy to get accurate focus. The Kapture Group sliding back works very well.
Larry, are you using a regular Fline or a metric ?
Anyway, i will run out of image circle with a HR for architecture !
-
Better you use a Linhof Technar or Sinar artec, both have sliding backs and they can handle a 23mm.
With the Linhof you can use your lenses(changing plate).
The last days I used liveview with a laptop mounted on the tripod of the camera.
It was easier than I expected.
Michael
buying new... i will go for an arca RL3D, a cambo Wide RS, or an alpa Max...
there's a lot of wind here, and sometimes i have to take pictures in insecure area... so having a laptop with me isn't the answer !