Luminous Landscape Forum

Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: ph_anto on December 24, 2008, 06:58:37 pm

Title: Problem whit a New H3D39
Post by: ph_anto on December 24, 2008, 06:58:37 pm

[attachment=10508:suspect_dent.jpg]My new Hassy had some dust spots on the back.whit the E-Wipe now seem ok.I'm afraid since one of the spot is always present and worst of all,i think it's a little dent in the IR filter.What do You think about?
Thanks for suggestion


P.S.:this is the spot as it appears shoting at F32

Title: Problem whit a New H3D39
Post by: DavidP on December 24, 2008, 10:45:14 pm

Are you sure it is not something inside the camera? maybe be some lint on the other side of the shutter

Title: Problem whit a New H3D39
Post by: Bernd B. on December 25, 2008, 04:27:59 am

is it in the center of the image or at the edge?

Title: Problem whit a New H3D39
Post by: rainer_v on December 25, 2008, 05:44:59 am

i had one time one dust under the ir glas. it was cleaned with air pressure without removing he glass.

Title: Problem whit a New H3D39
Post by: ph_anto on December 25, 2008, 12:02:56 pm

the jpg you can see is exactly the right low corner,loking the final images.so it should be in the upper left corner of the back(positioned)

Title: Problem whit a New H3D39
Post by: BJNY on December 25, 2008, 01:56:05 pm

ph_anto,
May I suggest you let your dealer sort this out for you.

Title: Problem whit a New H3D39
Post by: Dustbak on December 25, 2008, 05:01:43 pm

Same advice here, get it to your dealer or take it up with Hasselblad directly but let Hasselblad sort this out for you.

Title: Problem whit a New H3D39
Post by: ph_anto on December 26, 2008, 05:58:39 am

Thanks for the advice,i'll contact yhe service next monday.