Luminous Landscape Forum

Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: Raphael on September 24, 2008, 03:04:23 pm

Title: Acute ringflash transport solution
Post by: Raphael on September 24, 2008, 03:04:23 pm
Hi everyone,

It might be a little offtopic, but does anyone have a recommendation for packing an acute ringflash with a  soflight reflector for transport? I can't seem to find a dedicated case.

thanks for your input.

R.
Title: Acute ringflash transport solution
Post by: Sean Reginald Knight on September 24, 2008, 03:12:46 pm
Check out drum and cymbal cases for the reflector. It is safest to pack the ringflash in a case like the Versaflex with your power pack.
Title: Acute ringflash transport solution
Post by: perbernal on September 24, 2008, 03:17:59 pm
Quote
Hi everyone,

It might be a little offtopic, but does anyone have a recommendation for packing an acute ringflash with a  soflight reflector for transport? I can't seem to find a dedicated case.

thanks for your input.

R.
[a href=\"index.php?act=findpost&pid=224034\"][{POST_SNAPBACK}][/a]

Hi Raphael,

You should look into the Pro Ring Diffuser from Profoto. Depending on how you use your ring flash, main or fill light, it´s an good alternative to the regular ringflash reflector with similar effect. It goes on top of the ring light and packs nicely in a aircase from Tenba. I have a version of this bag that packs two Acute 1200´s or two Acote 600B´s plus two heads with two grid reflectors and the ring flash itself. And it comes in just under 50 lbs when you travel:)
Title: Acute ringflash transport solution
Post by: paul_jones on September 24, 2008, 03:35:04 pm
Quote
I used a Tenba car case for that setup for in town use and by pulling off the camera mount could fit it in a pelican case for tougher protection.
[a href=\"index.php?act=findpost&pid=224040\"][{POST_SNAPBACK}][/a]


i have my acute ring flash packed in a pelican 1650 case in a seperate compartment with a my acute lights. its got 2 inches of foam around it, but i have still smashed the glass at the front twice!
the tubes been ok, just the protection glass. so what ever you do, make sure it has quite a bit of very soft foam around it.

paul
Title: Acute ringflash transport solution
Post by: clawery on September 24, 2008, 03:44:29 pm
Here are a couple of Tenba Car Cases that we carry and I'm checking on a dedicated one for your
Acute ring flash.


[attachment=8477:attachment]
[attachment=8478:attachment]

Chris Lawery
Sales Manager
[email protected]
Capture Integration, Phase One Dealer of the Year (http://www.captureintegration.com)

877-217-9870 | National  Atlanta / Miami
404-234-5195 | Cell  
Sign up for our Newsletter (http://visitor.constantcontact.com/email.jsp?m=1101868815210&p=oi) | Read Our Latest Newsletter (http://www.captureintegration.com/our-company/newsletters/)
Title: Acute ringflash transport solution
Post by: James R Russell on September 24, 2008, 03:55:02 pm
Quote
Here are a couple of Tenba Car Cases that we carry and I'm checking on a dedicated one for your
Acute ring flash.
[attachment=8477:attachment]
[attachment=8478:attachment]

Chris Lawery
Sales Manager
[email protected]
Capture Integration, Phase One Dealer of the Year (http://www.captureintegration.com)

877-217-9870 | National  Atlanta / Miami
404-234-5195 | Cell 
Sign up for our Newsletter (http://visitor.constantcontact.com/email.jsp?m=1101868815210&p=oi) | Read Our Latest Newsletter (http://www.captureintegration.com/our-company/newsletters/)
[a href=\"index.php?act=findpost&pid=224049\"][{POST_SNAPBACK}][/a]

I doubt if those Tenba cases will cut it.  We transport our Ring flash in an Anvil case that I am positive will survive the next Russian attack and we've still busted the protective glass.

It is one of the few items I rent when traveling and it's cheaper than replacing the front glass and paying american airlines, $22,000 for baggage overage.

JR



JR
Title: Acute ringflash transport solution
Post by: Raphael on September 24, 2008, 05:57:25 pm
thank you all for the replies.
Chris , if you did find a dedicated case, let me know.

cheers,

R.
Title: Acute ringflash transport solution
Post by: clawery on September 25, 2008, 10:04:47 am
Quote
thank you all for the replies.
Chris , if you did find a dedicated case, let me know.

cheers,

R.
[{POST_SNAPBACK}][/a] (http://index.php?act=findpost&pid=224120\")


I talked with MAC and they do not have a specific case for the ring flash.  James is correct.  The car cases are good for location to location transport, but flying may be a bit different.  Tenba does offer the Aircase line, but it is not as robust as an Anvil style case or even a Storm case.  With all of the new luggage charges, it is getting more difficult to take your own personal equipment on location.

Chris Lawery
Sales Manager
[email protected]
[a href=\"http://www.captureintegration.com]Capture Integration, Phase One Dealer of the Year[/url]

877-217-9870 | National  Atlanta / Miami
404-234-5195 | Cell  
Sign up for our Newsletter (http://visitor.constantcontact.com/email.jsp?m=1101868815210&p=oi) | Read Our Latest Newsletter (http://www.captureintegration.com/our-company/newsletters/)
Title: Acute ringflash transport solution
Post by: TMARK on September 25, 2008, 10:27:23 pm
I'd rent when you get there.  I have my ring in a Pelican 1550, foam cut to fit.  First time on a plane the glass broke.  

With the baggage restrictions now I roll really really light.  If I fly I rent.