Luminous Landscape Forum
Equipment & Techniques => Medium Format / Film / Digital Backs – and Large Sensor Photography => Topic started by: MarkKay on December 15, 2007, 07:11:16 pm
-
can anyone tell me which mount this was designed for?
-
Doesn't Rollei X-Act use the same lever locks?
-
Yes it connects to the rollei x act 2 but is an adapter for a specific back type and that is what i am not sure about.
Doesn't Rollei X-Act use the same lever locks?
[a href=\"index.php?act=findpost&pid=160954\"][{POST_SNAPBACK}][/a]
-
Looks like the base plate without the interchangeable cameraback adapter plate.
-
can anyone tell me which mount this was designed for?
[a href=\"index.php?act=findpost&pid=160937\"][{POST_SNAPBACK}][/a]
I have 9 of these ALPA Lens Plate Model Nº 450'010'016 also I have one copy of this one too Model Nº 450'010'034.
-
Looks like the base plate without the interchangeable cameraback adapter plate.
[{POST_SNAPBACK}][/a] (http://index.php?act=findpost&pid=160980\")
I think ixpressraf is correct. This looks like the rear plate of an Alpa without the interchangeable
plate. Here is a link to Alpa's web site:
[a href=\"http://www.alpa.ch/index.php?path=products]http://www.alpa.ch/index.php?path=products[/url]
Chris Lawery
Sales Manager
Capture Integration
www.captureintegration.com
-
Rollei uses/used to use the Alpa mount parts on the back of their X-Act camera.
Looks like one of these adapters.
Could you show the other side of it please?
-
HEre is the backside
Rollei uses/used to use the Alpa mount parts on the back of their X-Act camera.
Looks like one of these adapters.
Could you show the other side of it please?
[a href=\"index.php?act=findpost&pid=161022\"][{POST_SNAPBACK}][/a]
-
Thanks.
This is an X-Act part. Can't say if it is for a viewfinder or a magazine.
http://www.rollei.com/files/XActSalesfolderE.pdf (http://www.rollei.com/files/XActSalesfolderE.pdf)
"I have 9 of these ALPA Lens Plate Model Nº 450'010'016 also I have one copy of this one too Model Nº 450'010'034."
These parts are Alpa, 16 and 34mm macro adapters.
-
Thanks.
This is an X-Act part. Can't say if it is for a viewfinder or a magazine.
http://www.rollei.com/files/XActSalesfolderE.pdf (http://www.rollei.com/files/XActSalesfolderE.pdf)
"I have 9 of these ALPA Lens Plate Model Nº 450'010'016 also I have one copy of this one too Model Nº 450'010'034."
These parts are Alpa, 16 and 34mm macro adapters.
[a href=\"index.php?act=findpost&pid=161047\"][{POST_SNAPBACK}][/a]
Good idea that you ask to post the back of the adapter. Anyway, my frames are 7 TC frames, 2 SWA frames that rather look improved or very similar [from the top] including the 16 and 34mm macro adapters. Back of the picture certainly helps!
-
HEre is the backside
[a href=\"index.php?act=findpost&pid=161044\"][{POST_SNAPBACK}][/a]
Mark:
This is the Rollei Adapter that was sold to mount a V mount Hasselblad back to Rollei Xact2. I had this same system and we had to use this adapter before Keith At the Kapture Group designed a sliding back for the Xact2. A second plate fits this holder that is why there are two arms at the top to open and close. The rear circular mount fits the rear and front standards of the Xact2
I have the insert that fits this mount if you need one. Email if you need this. It would then make it possible to mount a V style back to the view camera rear standard. I think tha Alpa also uses similar pieces, maybe using them from Rollei because they were already designed.
Chris Snipes
Image Productions, Inc
www.imageproduction.com
[email protected]
Phase One Test Studio Florida
New and Used Phase One Backs
Phase One Support Production Motorhome
-
.... I think tha Alpa also uses similar pieces, maybe using them from Rollei because they were already designed.
Rollei bought/buys these parts from Alpa, as already mentioned.
-
Thanks for this reply and for all the other responses. I do appreciate it. I am selling the Rollei Xact 2 and just wondered what his piece was since i never used it. I had an H mount sliding back.
Mark:
This is the Rollei Adapter that was sold to mount a V mount Hasselblad back to Rollei Xact2. I had this same system and we had to use this adapter before Keith At the Kapture Group designed a sliding back for the Xact2. A second plate fits this holder that is why there are two arms at the top to open and close. The rear circular mount fits the rear and front standards of the Xact2
I have the insert that fits this mount if you need one. Email if you need this. It would then make it possible to mount a V style back to the view camera rear standard. I think tha Alpa also uses similar pieces, maybe using them from Rollei because they were already designed.
Chris Snipes
Image Productions, Inc
www.imageproduction.com
[email protected]
Phase One Test Studio Florida
New and Used Phase One Backs
Phase One Support Production Motorhome
[a href=\"index.php?act=findpost&pid=161213\"][{POST_SNAPBACK}][/a]