Luminous Landscape Forum

Raw & Post Processing, Printing => Adobe Lightroom Q&A => Topic started by: pflower on July 15, 2025, 02:55:32 pm

Title: Strange Change in Printing from LR Classic to SC-P5000 or a Problem?
Post by: pflower on July 15, 2025, 02:55:32 pm

I have just changed from an intel iMac to a new M4 Studio running Sequoia 15.5.  Got the relevant software to communicate with the printer, updated LR Classic - so far so good.  But as a test print I decided to print something on Epson Enhanced Matt (my go to test paper).  So I choose the appropriate Print Template which I had created on my previous Mac and went to the Color Management part and clicked on Profile - the only profiles showing were those that I had created myself for other papers.

 None of the Epson installed Profiles showed up - even though they were associated with the print template I chose.  So I clicked on the "other" option and found all the usual Epson Paper profiles for the P5000 had all been properly installed.  So I clicked on the one I wanted but the Profile tab in LR remained blank.  Previously if I clicked on a profile it would show up within the Profile tab in LR and remain as an option to choose.  But here it wouldn't. 

It gets slightly worse.  If I choose the same print to print on, say Canson Prestige II for which I have a profile made things seem fine.  But any of the installed Epson profiles seem way out of line with what I previously experienced.

Thinking about it this seems to be an Epson Problem but then again ....

Any thoughts or advice

Thanks

Title: Re: Strange Change in Printing from LR Classic to SC-P5000 or a Problem?
Post by: pflower on July 16, 2025, 06:51:41 am

Stupid user error.  I forgot to restart the computer after installing the printer drivers.  Now everything works as it should.