Luminous Landscape Forum
Equipment & Techniques => Digital Cameras & Shooting Techniques => Topic started by: Coke on January 09, 2007, 11:43:41 am
-
Hi there panorama guys!
I'm just starting out with panorama photography. And was hoping
you can help me with this. My setup consists from bottom to top of:
tripod, ballhead (clamp bubble leveld), rrs 360° panoramabase with clamp,
nodal slide with clamp, L-bracket with camera in vertical orientation.
I'm using a 28mm lens on an 1.6x crop body. The test images below
consists of 12 shots all taken with the same exposure and fstop (f8)
in manual mode. also white balance was fixed. As you can see there
is some blending errors with the first few frames to the left. How can
sth like this happen? I turned all bells and extras in the panoramasoftware
I use off and only had it stitch the unedited images. I think that rules out
the software as a source of the error?!
(http://www.florianbuetow.com/refers/ll/pano_sample1.jpg)
The image covers almost 180°
Sometimes the problem exists, and sometimes not. Maybe it's because
of the angle towards the sun? If so how can I still get blendable frames?
Here is another (less obvious) example (~10 frames):
(http://www.florianbuetow.com/refers/ll/pano_sample2.jpg)
Thank you very much!
-
First thing that comes to mind is are you using a polarizer? It looks like you are. If you are, don't, as it produces different results when you re-align the camera for the next shot.
Another one is to turn ON all the bells and whistles. Autopano (software I use) blends lighting differentials on its own and does a great job. Even if you work fast the light can and does change in landscape photos due to clouds moving, so you _will_ have different lighting frame-to-frame. For this reason the software should have some lighting blending/normalizing options.
Finally, what f-stop are you using? Vignetting can be difficult for pano software to fix, so use an f-stop that doesn't vignet with your lens.
-
First thing that comes to mind is are you using a polarizer? It looks like you are. If you are, don't, as it produces different results when you re-align the camera for the next shot.
Another one is to turn ON all the bells and whistles. Autopano (software I use) blends lighting differentials on its own and does a great job. Even if you work fast the light can and does change in landscape photos due to clouds moving, so you _will_ have different lighting frame-to-frame. For this reason the software should have some lighting blending/normalizing options.
Finally, what f-stop are you using? Vignetting can be difficult for pano software to fix, so use an f-stop that doesn't vignet with your lens.
[a href=\"index.php?act=findpost&pid=94780\"][{POST_SNAPBACK}][/a]
Hi,
All shots were taken at f8 and manual focus to hyperfocal distance
without a polarizer. The only filter on the lens was a B&W MRC UV
Filter.
I just installed the demo of Autopano and had it process the frames of
the first pano seen above. This time with all auto settings on. The result
looks like this:
(http://www.florianbuetow.com/refers/ll/pano_sample1_autopano.jpg)
Its obviously a bit better than my first try with Panoramastudio (which produced
no better results with everything on auto), but the edges of the frames are still
visible as dark bands (if you scroll left right u can see it best). I didnt notice
a change of light when shooting the panorama (~1 frame each 3 sec) but I'll
do the next time I do.
Regards,
-
Well, I'm flummoxed. That's right, flummoxed. I haven't seen such problems before. I doubt the light has changed that much with such fast shooting. The only culprit that I can imagine is vignetting. But at f/8 it shouldn't be a problem.
If all else fails, I'd just take a very wide clone brush and smoothen the sky manually. Shouldn't take more than a few minutes.
-
...The only culprit that I can imagine is vignetting. But at f/8 it shouldn't be a problem....
The filter could have caused a bit more vignetting than shooting without it...
-
Try the new stitch plugin in PS3 beta. A couple of weeks ago I demoed all the available programs out there. I had CS2 but it would not do 16 bit files, so i was shopping when the beta CS3 came out. I found it the best of all the ones around.
-
It has been my experience doing panos with as many as 6 images (mf)
1. no polarizer
2. Manual exposure, not automatic exposure
3. a medium telephoto not wide wide angles
4. Level the tripod and the camera
5. overlap about 25% or more
I would also try and not have to long of an exposure per image.
This generaly works and I have been able to get some great results using the auto function on CS2
Keep trying Try without any filters, if still a problem, try with a longer lens
-
Some possible causes:
- a problem with the software, you should try PTgui to see if the problem is still present or not,
- some strange flare effect with your lens/filter combo, the problem is indeed a lot more visible see the bright part of the images. You should be able to check this on individual images though. The RGB values on the left of images should be brighter than in the middle (since the sun is on the left),
- a problem with your shutter, that would not be able to deliver the right speed in a reliable way,
- a problem with your lens that would not close down in a regular way.
Cheers,
Bernard
-
I have had good luck with Panorama Factory and the following:
1. auto exposure on
2. no UV or CP filter
3. use DXO optics to correct lens distortions
4. use Photoshop Image/adjustments/match color to get the frames close
Remember the sky and lighting change as your angle changes from the sun so a panorama will have sky that varies throughout the picture.
Marc
Sorry for the poor JPEGs
[attachment=1509:attachment]
[attachment=1510:attachment]
-
I have had good results with PTAssembler, an interface that addresses the Panotools set. There is an extra plugin called Enblend which effectively corrects such banding in the sky. PTAssembler is not expensive and the Enblend plugin is free. I shoot RAW which gives me the opportunity to process the RAW files in exactly the same way, that helps. Even very good lenses show some vignetting, it helps to provide sufficient overlap from one image to the next, at least 25-30%. Have a look at pano's on the France and Brittany galleries on my website, there one that consists of 50 images, and others with 10-20 images.
Gerard Kingma
www.kingma.nu (http://www.kingma.nu)
-
I have had good luck with Panorama Factory and the following:
That pano of Haleakala is freaking beautiful Nice job. I work with two other photographers shooting real estate pano's and they use Panorama Factory. It works very well for them.
-
I am doing a lot of landscape panos and had never problems because of a polarizing filter.
http://www.rainermirau.com/auftrag/panorama.htm (http://www.rainermirau.com/auftrag/panorama.htm)
-
I use PanoTools Assembler, and have gotten great results:
Large file (548K) (http://www.visual-vacations.com/images/2005-01-28-0027-0033.jpg)
This is a 6-image stitch, and I challenge anyone to find a seam.
-
I have had some great results using CS3.
Much better than anything I have used previously.
But then I have not had the energy to work all that hard att getting everything right in some of the more complex programs. CS3 is easy and seems to work great!
http://www.wombat.to/zoom/chamonix-2.html (http://www.wombat.to/zoom/chamonix-2.html)
This is only a early test but is from handheld, aperture priority shots.
Please ignore the banding in the sky, it was processed as 8 bits.
Mats
-
One for the road. PTgui 5.8, 5 Mamiya ZD images.
(http://farm1.static.flickr.com/116/308651301_b30b650423_o.jpg)
Cheers,
Bernard
-
You forgot to get rid of the dust spots in the sky...
-
You can always manually align the layers in PS and then adjust the curves until they perfectly match. It takes forever, however. Could the lens be flaring as it approches the sun. This could cause exposure anomalies.
Bernard, amazing photo. It makes me want to head right back into the mountains. But I too noticed the dust spots right off the bat. Probably the many hours spotting my own photos.
Phillip
-
You forgot to get rid of the dust spots in the sky...
[a href=\"index.php?act=findpost&pid=100665\"][{POST_SNAPBACK}][/a]
Yep, I know. This is an old version of the image, the only one I had readily available online when I read this post. The point was more about the quality of the work done by PTgui than about the actual image.
The final print is actually based on a new set of RAW conversions and panorama work.
Cheers,
Bernard
-
I have had good luck with PtGui as well, but in a panorama of the bay at Biarritz all pano SW failed. I attribute to a consistent shift of the exposure from left to rt or rt to lft. Each frame then has an exposure change that is difficult to blend. It seems to happen esp at sunrise or sunset. Note that the great panos above do not have dramatic side shift of exposure.
Another issue is too much resolution. I see many times better stiching from my Leica R (DMR) than from my Contax P25 or P45. The pixel alignment must cause some kind of moire like effect.
Also, NO pre processing, as that really messes the consistency of the images. The best is right from camera with Prophoto to the pano SW.
But try also to get the exposue as close as possible.
Good luck.
BTW, BL, wonderful pano there!
regards
Victor
-
[Hello,
A used a lot of them PS 2, PS 3, PtGui, PanoTools Assembler, Autopano Pro, but the easiest is Autostitch (http://www.autostitch.net). Visit the site.
Good luck.
Wood
-
Bernard, did you ever compared PTgui to PTAssambler ? Can you comment on differences or what is better ? Or just different optics...
Thanks
-
Before stitching your source pictures you have to correct for vignetting and distorsion.
PTLens from epaperpress (http://epaperpress.com/ptlens/index.html) works fine, for example.
Blending: Try layer output and blending in PS CS3 or you can use Smartblend (http://smartblend.panotools.info/) or Enblend (http://enblend.sourceforge.net/)