Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: Jonathan Cross on January 25, 2022, 05:09:29 pm
-
I cannot get my Canon 9500 mk2 running on my old PC. In addition I am running Monterey on a M1 Mac and Canon does not have a driver. After a long time I now need a new printer and am seriously thinking of a Canon Pro-200. I do not print larger than A3+ and do not have high volume.
Has anyone got one? I print B&W as well as colour and Northlight has a few reservations re B&W. Does anyone share these? I do not print on gloss paper at all.
Best wishes,
Jonathan
-
I can't speak from direct experience with the Pro-200 but I had a Canon Pro-9000 and a variety of A4 dye ink-jet printers over the years. All struggled with B&W producing slight colour casts green/magenta which, despite my best efforts, proved almost impossible to get rid of.
It was only when I bought a Pro-1, a pigment printer with dedicated grey inks, that finally I was able to get good quality B&W prints. Moreover, I can now tint them successfully and the results are very satisfying.
My tentative conclusion from this would be that if you want to get some satisfying B&W prints without struggling with colour casts then the Pro-300, which is a pigment printer, will more likely give you the results you want.
-
I've had a Pro 200 for about 6 months and so far it's produced better results in colour than my previous pigment Epson R2000. I've printed a few b&w with good results. No significant tint under any lighting I've used. For mono, the important thing is to set "black and white" in the printer settings (rather than printing a mono image in colour mode.
Have a look at Keith Cooper's reviews where he's looked in detail at mono performance:
https://www.northlight-images.co.uk/canon-pro-200-printer-review/ (https://www.northlight-images.co.uk/canon-pro-200-printer-review/)
https://www.northlight-images.co.uk/black-and-white-printing-with-the-pro-200/ (https://www.northlight-images.co.uk/black-and-white-printing-with-the-pro-200/)
and several others on that site.
-
Thanks for the replies. In the UK the 200 has not been available for several months. I have looked the Northlight reviews of both the 200 and 300. In the end I have just picked up a 300 so now have the fun of setting it up and sorting out profiles for the papers I used with the 9500mk2 which I took with some sadness to the tip this morning.
Jonathan
-
Shame you couldn't get a PRO 200. I bought mine (in the UK) in May last year, when I had to shop around to find one in stock, but nobody seems to have it now. However, having taken the hit on the higher price of the Pro 300 I reckon you'll be happy with it. Keith Cooper seems to rate both well for mid-range printers.